Sorry, this product is currently unavailable
Alternative products you may be interested in:
ColorFabb ColorFabb copperFill Metal Filament - 1.75mm (0.75kg)
Start 3D printing with real metal today with ColorFabb copperFill. CopperFill is made of real copper particles and PLA so it works with desktop 3D printers!
Searching for an authentic metallic look? No further investigation needed! colorFabb's copperFill filament is perfect for a rustic finish. To achieve a nice, smooth piece, all you need to do is print, sand, and polish!
MatterHackers is excited to be a U.S. authorized distributor for copperFill. This filament prints best with our E3D all-metal HotEnds.
| List Price: | $64.95 |
|---|---|
Sometimes here at MatterHackers we get a little bored printing with plastics. Thanks to ColorFabb's copperFill, we can shake things up a bit by printing with actual copper! At first, the copperFill appears to be laser sintered with a matte finish - fear not, for a little sanding and polishing allows the infused copper particles to sparkle unlike any filament that you have seen before!
Another great characteristic of copperFill is its weight - it's about three times heavier than standard PLA, which really adds to the authenticity of your prints. This is ideal if you are printing items like jewelry or other artistic pieces.
Before and after polishing
During production, ColorFabb copperFill uses laser measurment systems to confirm that the diameter of the filament is consistant - this guarantees that your printer is extruding the exact amount of filament that is should be.
Printing Tips and Tricks:
- Bed Adhesion: use blue painter's tape with no heat, or bare glass @ 55-60C; when printing straight on the heated glass, use gluestick or kapton tape.
- Print Temp: 190-220C
- Because of copperFill's combination of PLA and copper fibers, heat will travel through the filament more efficiently - this means that the filament will heat more easily, and cool down faster when leaving the nozzle. (This is great for printing objects with an overhang)
- Density: ~3.9 g·cm^-3
Achieve a timeless look!
After the Print:
- Use coarse steel wool to polish the surface of the print. You can apply quite a bit of pressure but don’t polish a specific spot for too long - it can get hot and soften the material.
- After using the steel wool, the print should be shimmering and smooth, with no visible print lines.
- To acheive the darker, almost shadow like look in certain print, apply a very thin layer of black spray paint, and then immediately wipe it off with cloth. The paint will remain in the nooks and crannies of the details that you want to look enhanced.
- Finally, use a copper polish to get the piece to really shine!
