3D Gloop! 3D Gloop! ABS Gloop Brushtop Bottle - 120ml
ABS Gloop is specially formulated to provide the best bed adhesion on the market for ABS FDM printers. Using ABS Gloop will give you the best chance for successful first layers, with little to no warp or curl throughout the print. This product can even be used to print ABS on build plates as low as 60C.
Note: 3D Gloop! is designed to work on glass and mirror surfaces. It is not recommended for use on PEI coated build platforms or any textured print surface as it will likely permanently fuse to it.
| List Price: | $34.99 |
|---|---|
| Price: | $34.99 |
| Price: | $... |
BED ADHESION AND PRINT BONDING IN ONE!
Say goodbye to weak or flimsy bonds! With 3D Gloop! simply apply a small amount of Gloop to your print bed or to the bonding surface of parts you wish to fuse to achieve seriously strong adhesion.
To fuse parts simply apply 3D Gloop!, press and hold together for 15-30 seconds to achieve a strong tack hold. Bonds will achieve 80% strength after an hour and full strength within 6 hours of application.
Note: Bonding times will vary depending on bonding surface size and application amount.
THE 3D GLOOP! FAMILY
- 3D Gloop! ABS Glue Gloop Squeeze Tube- 15ml
- 3D Gloop! PLA Glue Gloop Squeeze Tube- 15ml
- 3D Gloop! PLA Glue Gloop-25ml
- 3D Gloop! ABS Glue Gloop-25ml
- 3D Gloop! ABS Gloop Brushtop Bottle-120ml
- 3D Gloop! PLA Gloop Brushtop Bottle-120ml
MULTI-MATERIAL COMPATABILITY
Want to bond ABS and PLA prints together? No problem!
Either formulation of Glue Gloop works great when bonding ABS to PLA or vice-versa. It is recommended that the appropriate formulation of Gloop is used on each bonding surface in order to guarantee the strongest possible bond.
California Prop 65 Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm.
