Bambu Lab Bambu Lab Apple Green Matte PLA Filament Refill - 1.75mm (1kg)
The Bambu Lab Matte PLA is a 1.75mm diameter PLA 3D printer filament compatible with any 3D printer and optimized for Bambu Lab X1 series and P1 series printers. It utilizes RFID technology with the Bambu Lab AMS and is available with a Refill option.
- Compatible with RFID Technology
- Eco-friendly Refill Option
- Nozzle Temp: 190 - 230 °C
- Bed Temp: 35 - 45 °C
- Save on the Pack of 10 spools
Price: | $2,459.00 (with add-ons) |
---|---|
Availability: | In Stock |
Order Now: | Ships Tomorrow Free U.S. Shipping |
Bambu Lab PLA Basic
The Bambu Lab offers PLA Basic 3D printer filament compatible with any 3D printer and especially optimized for their Bambu Lab X1 Series and Bambu Lab P1P.
Key Features of the Bambu Lab PLA Basic:
- Made of Polylactic Acid (PLA)
- 1.75mm Filament Diameter
- Compatible with RFID Technology on the Bambu Lab AMS
- Recommended Nozzle Temp: 190 - 230 °C
- Recommended Bed Temperature: 35 - 45 °C
- Glue Stick Recommended
- Available as a Refill for a More Eco-Friendly Option
- Reuse Previous, Print, or Purchase a Bambu Reusable Spool
- Download Here if Printing (also available on your Bambu Lab 3D Printer)
Recommended Printing Settings
Description | Value |
---|---|
Nozzle Temperature | 190 - 230 °C |
Bed Temperature (with PVP Glue) | 35 - 45 °C |
Drying Settings before Printing | 55 °C, 8 h |
Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) |
Printing Speed | < 300 mm/s |
Physical Properties
Property | Value |
---|---|
Density | 1.24 g/cm³ |
Vicat Softening Temperature | 57 °C |
Heat Deflection Temperature | 57 °C |
Melting Temperature | 160 °C |
Melt Index | 42.4 ± 3.5 g/10 min |
Mechanical Properties
Property | Value |
---|---|
Tensile Strength | 39 ± 2 MPa |
Breaking Elongation Rate | 12.2 ± 0.4 % |
Bending Modulus | 2750 ± 60 MPa |
Bending Strength | 76 ± 3 MPa |
Impact Strength | 26.6 ± 2.8 kJ/m² |
How Do I Refill my Bambu Lab Reusable Spool?
Step 1 - Align Refill with Spool
- Find the locator (a tiny block on the wide piece).
- Align it with the notch on the inner ring of the filament roll.
- Insert the wide piece into the filament roll.
Step 2 - Insert Narrow Piece & Lock In Spool
- Insert the narrow piece and align the groove of each piece inside of the spool until it's pushed firmly into the wide piece.
- Once it's pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.
Step 3 - Install Shim & Remove Strips
- Install the spacing shim inside the spool (under the triangle)
- Pull out the 4 plastic strips
Need a visual step-by-step tutorial? Check out the Youtube video above.
Questions
Can this be shipped assembled?
What is the total weight of the kit?
Is there a dual extruder that is compatible? Not Dual drive gears. This is for multiple colors or different filaments.
If I buy this, can I use this machine to print the components needed in the kit that need to be printed or are they necessary to the functionality of this machine?
Does this include all the LDO listed extras, and mods from the LDO docs linked?
Does this ship withe the Revo 40 watt or 60 watt heater?
Can the stock hot end on this kit handle papa-cf at 350c nozzle temperature?
Are these kits compatible with 220V power input with no modification?
Where are these kits shipped from? I'm based in Spain (EU), so for any product coming from outside the EU I will be charged with taxes and handling fees...
Where is the guide to the aluminum parts?
If the kit is ordered with blue fram is there any option to get the printed ABS parts with blue accent parts rather than red? If not do you have a recommendation for a source for printed parts with blue accent parts? Also what else is needed to build a complete ready to run printer, what else do I need to order or sourse out.
I am planning on building a Voron 2.4 but in a 500mm size. I have a project coming up that will require between 460mm and 490mm print size. I am sourcing my own frame (I downloaded a BOM from Voron site) but I doo need a 9mm belt upgrade (not sure if that is included in the V2.4) and all other parts not including hardware and all ABS parts. I do need all the Voron 2.4 Aluminum 3D Printer Parts. Is it possible to source all of the above from you or do I have to go out and hunt all the parts myself? Thanks. John
Is it compatible with the : BIQU Hermit Crab Quick Change system ? BIQU H2 V2S Lite Revo Extruder ? Does it need or have an auto bed leveling system ?
If I want a glass bed instead of a flexible PEI sheet, is that possible?
Is the build process similar to Prusa?
Will this work with rPi 3B or just rPi 4 series?
What brand is the power supply?
Does this kit come with the acrylic needed to enclose the printer?
Yes, it comes with acrylic panels.