Bambu Lab E3D Hemera Dual Drive Extruder and Hotend Full Kit (24v)
The Bambu Lab Matte PLA is a 1.75mm diameter PLA 3D printer filament compatible with any 3D printer and optimized for Bambu Lab X1 series and P1 series printers. It utilizes RFID technology with the Bambu Lab AMS and is available with a Refill option.
- Compatible with RFID Technology
- Eco-friendly Refill Option
- Nozzle Temp: 190 - 230 °C
- Bed Temp: 35 - 45 °C
- Save on the Pack of 10 spools
Availability: | Currently Unavailable |
---|
Bambu Lab PLA Basic
The Bambu Lab offers PLA Basic 3D printer filament compatible with any 3D printer and especially optimized for their Bambu Lab X1 Series and Bambu Lab P1P.
Key Features of the Bambu Lab PLA Basic:
- Made of Polylactic Acid (PLA)
- 1.75mm Filament Diameter
- Compatible with RFID Technology on the Bambu Lab AMS
- Recommended Nozzle Temp: 190 - 230 °C
- Recommended Bed Temperature: 35 - 45 °C
- Glue Stick Recommended
- Available as a Refill for a More Eco-Friendly Option
- Reuse Previous, Print, or Purchase a Bambu Reusable Spool
- Download Here if Printing (also available on your Bambu Lab 3D Printer)
Recommended Printing Settings
Description | Value |
---|---|
Nozzle Temperature | 190 - 230 °C |
Bed Temperature (with PVP Glue) | 35 - 45 °C |
Drying Settings before Printing | 55 °C, 8 h |
Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) |
Printing Speed | < 300 mm/s |
Physical Properties
Property | Value |
---|---|
Density | 1.24 g/cm³ |
Vicat Softening Temperature | 57 °C |
Heat Deflection Temperature | 57 °C |
Melting Temperature | 160 °C |
Melt Index | 42.4 ± 3.5 g/10 min |
Mechanical Properties
Property | Value |
---|---|
Tensile Strength | 39 ± 2 MPa |
Breaking Elongation Rate | 12.2 ± 0.4 % |
Bending Modulus | 2750 ± 60 MPa |
Bending Strength | 76 ± 3 MPa |
Impact Strength | 26.6 ± 2.8 kJ/m² |
How Do I Refill my Bambu Lab Reusable Spool?
Step 1 - Align Refill with Spool
- Find the locator (a tiny block on the wide piece).
- Align it with the notch on the inner ring of the filament roll.
- Insert the wide piece into the filament roll.
Step 2 - Insert Narrow Piece & Lock In Spool
- Insert the narrow piece and align the groove of each piece inside of the spool until it's pushed firmly into the wide piece.
- Once it's pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.
Step 3 - Install Shim & Remove Strips
- Install the spacing shim inside the spool (under the triangle)
- Pull out the 4 plastic strips
Need a visual step-by-step tutorial? Check out the Youtube video above.
Questions
will this work on a CR-10s Pro V2
Do you have a mirrored kit or do I just use two of these for a dual head extruder?
Will this fit on a Replicator 2? If not is, there another extruder/ hot end that is?
I want to upgrade my new Ender 6 corexy do you have a kit for the ender 6?
How much does the assembly that would go on an Ender 3 weigh?
What kit does the ender 3 v2 need I think its 24v not sure tho
Can the Qidi X-plus be upgraded with the Hemera extruder? I can adjust the esteps with G code but I don't know if there's some magic to changing the thermistor or can I use the one from the stock hot end?
I have an Ender 5 pro. Would it need 12v or 24v?
Is a 3mm (2.85mm) filament version coming soon?
Will this work on a TAZ5 or TAZ 6?
How hot does hotend that comes Hemera hot end get?
Does the V6 hotend accept MK8 standard nozzles? I just purchased a bunch of Bondtech CHT nozzles for my Ender 3 V2 and want to use them on a Hemera. Thanks!
Is there any kit to install this on a Pulse?
What is the full dementions of the item? Lenth with and hight when fully put together
Will nozzles for my stock Ender 5 Pro fit the Hemera hot end? If not, what kind of nozzle is needed?
I just bought a used Robo 3D R1+ and want to upgrade it to a Hemera. I know I will have to do some modifications but I want to make sure the motor rating for current is within the spec for the board inside the printer. I also wanted to know if there is a metal adaptor bracket for mounting availible. It looks like I will need a right angle bracket maybe. I say that someone had posted a printed bracket to replace the factory one but it is in several pieces. Also is there a off the shelf fan and hood for the build fan. I saw several printed versions that I can print but because of the heat I was hoping for a lower profile and higher temp plastic molded one.
Will this work on my longer LK5 pro. I believe I need a 12v. Is there anything else recommended when replacing factory oem parts with the E3d hit end set up?
Ender 3, OctoPi, SKR E3 Turbo, modified firmware compiled and uploaded, verified wiring for HE0, VREF's set to proper for 2209s.... and then this Hemera won't extrude a millimeter... any fixes?
What type of heat break does this come with?
Hello! does Himera fit instead of factory's hot end on Sapphire plus printer?
I'm waiting on a left handed version of this product. Is that coming soon?
will this fit/work on Creality CR10 v3?
What e3d hotend comes with this? I'm trying to decide if I also want to get this: https://www.matterhackers.com/store/l/e3d-all-metal-v6-hotend-fully-assembled-1.75mm-universal-direct-24v/sk/MUZ58LEM, but I want to make sure that it's an upgrade before ordering both of these items.
I want to put the hemera on my Ender 5+. I don't want to have to buy the downgraded parts and also the upgrades. I just want to buy the hemera with the higher temperature heater, sensor, nozzle and heat block first shot. Is this possible from you?
For an ender 5 plus, I assume the modification is that I have to solder some wires together. Do I have to solder or can they be butt spliced?
Can hemera use carbon fiber filament?
The documentation says max temp ~285C, but upgradable to 500C. That’s great 😃. I want to print something at 330C, so I might be over-thinking things. It says you’ll need a copper V6. Is the V6 it comes with not copper? It says you’ll need a P100 thermistor. Ok, but why does the P1000 thermistor say it’s a drop-in replacement without an add-in board. If I’m running a creality 4.2.2 board which do I get? Is there anything else I’d have to upgrade?
Are you working on a mount for the Ender-6?
Do I need a 12 or 24 volt version for my I3 Mega ?
What are the cable lengths?
Hmmm wonder if it would fit in to a rostock v2
do you have this kit available to mount on CR6-SE?
Is there a mount for the Ender 3 V2 that minimizes lost Y-axis reach?