Bambu Lab Fillamentum HIPS Natural Extrafill Support Filament - 1.75mm (0.75kg)
The Bambu Lab Basic PLA is a 1.75mm diameter PLA 3D printer filament compatible with any 3D printer and optimized for Bambu Lab X1 series and P1 series printers. It utilizes RFID technology with the Bambu Lab AMS and is available with a Refill option.
-Compatible with RFID Technology
-Eco-friendly Refill Option
-Nozzle Temp: 190 - 230 °C
-Bed Temp: 35 - 45 °C
-Save on the Pack of 10 spools
Availability: | Currently Unavailable |
---|
Bambu Lab PLA Basic
The Bambu Lab offers PLA Basic 3D printer filament compatible with any 3D printer and especially optimized for their Bambu Lab X1 Series and Bambu Lab P1P.
Key Features of the Bambu Lab PLA Basic:
- Made of Polylactic Acid (PLA)
- 1.75mm Filament Diameter
- Compatible with RFID Technology on the Bambu Lab AMS
- Recommended Nozzle Temp: 190 - 230 °C
- Recommended Bed Temperature: 35 - 45 °C
- Glue Stick Recommended
- Available as a Refill for a More Eco-Friendly Option
- Reuse Previous, Print, or Purchase a Bambu Reusable Spool
- Download Here if Printing (also available on your Bambu Lab 3D Printer)
Recommended Printing Settings
Description | Value |
---|---|
Nozzle Temperature | 190 - 230 °C |
Bed Temperature (with PVP Glue) | 35 - 45 °C |
Drying Settings before Printing | 55 °C, 8 h |
Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) |
Printing Speed | < 300 mm/s |
Physical Properties
Property | Value |
---|---|
Density | 1.24 g/cm³ |
Vicat Softening Temperature | 57 °C |
Heat Deflection Temperature | 57 °C |
Melting Temperature | 160 °C |
Melt Index | 42.4 ± 3.5 g/10 min |
Mechanical Properties
Property | Value |
---|---|
Tensile Strength | 39 ± 2 MPa |
Breaking Elongation Rate | 12.2 ± 0.4 % |
Bending Modulus | 2750 ± 60 MPa |
Bending Strength | 76 ± 3 MPa |
Impact Strength | 26.6 ± 2.8 kJ/m² |
Step 1 - Align Refill with Spool
- Find the locator (a tiny block on the wide piece).
- Align it with the notch on the inner ring of the filament roll.
- Insert the wide piece into the filament roll.
Step 2 - Insert Narrow Piece & Lock In Spool
- Insert the narrow piece and align the groove of each piece inside of the spool until it's pushed firmly into the wide piece.
- Once it's pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.
Step 3 - Install Shim & Remove Strips
- Install the spacing shim inside the spool (under the triangle)
- Pull out the 4 plastic strips
Questions
WILL HIPS MATERIAL WORK AS A SUPPORT FOR PEEK? I'M RUNNING PEEK AT 400 C FOR NOZZLE TEMP.
Hello, Could you please tell me what the spool dimensions are (diameter & overall width)? I need to make sure it fits in my printer, which is compatible with 200mm diameter x 50-70mm wide spools.
How much limonene is needed per weight or volume of HIPS to remove? Can the limonene be re used to dissolve more HIPS on future parts, or does it need to be discarded after one part? I'm trying to get an idea on how much of this consumable I'll need. Thanks.