Bambu Lab Electric Orange PRO Series PLA Filament - 1.75mm (1kg)

The Bambu Lab Basic PLA is a 1.75mm diameter PLA 3D printer filament compatible with any 3D printer and optimized for Bambu Lab X1 series and P1 series printers. It utilizes RFID technology with the Bambu Lab AMS and is available with a Refill option.

-Compatible with RFID Technology
-Eco-friendly Refill Option
-Nozzle Temp: 190 - 230 °C
-Bed Temp: 35 - 45 °C
-Save on the Pack of 10 spools

Price: $52.00 (with add-ons)
Availability: In Stock
Order Now:
Ships Tomorrow MatterHackers Shipping Truck Free U.S. Shipping - excludes Alaska and Hawaii
Qty
Add to wishlist
Product No. M-RGQ-VKSQ
Spool Type: Spool
Refill
Spool
Pack of: 1
1
10
Color: Orange

Bambu Lab PLA Basic

The Bambu Lab offers PLA Basic 3D printer filament compatible with any 3D printer and especially optimized for their Bambu Lab X1 Series and Bambu Lab P1P.

Key Features of the Bambu Lab PLA Basic:

  • Made of Polylactic Acid (PLA)
  • 1.75mm Filament Diameter
  • Compatible with RFID Technology on the Bambu Lab AMS
  • Recommended Nozzle Temp: 190 - 230 °C
  • Recommended Bed Temperature: 35 - 45 °C
  • Glue Stick Recommended
  • Available as a Refill for a More Eco-Friendly Option
  • Reuse Previous, Print, or Purchase a Bambu Reusable Spool





Recommended Printing Settings

Description Value
Nozzle Temperature 190 - 230 °C
Bed Temperature (with PVP Glue) 35 - 45 °C
Drying Settings before Printing 55 °C, 8 h
Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant)
Printing Speed < 300 mm/s

Physical Properties

Property Value
Density 1.24 g/cm³
Vicat Softening Temperature 57 °C
Heat Deflection Temperature 57 °C
Melting Temperature 160 °C
Melt Index 42.4 ± 3.5 g/10 min

Mechanical Properties

Property Value
Tensile Strength 39 ± 2 MPa
Breaking Elongation Rate 12.2 ± 0.4 %
Bending Modulus 2750 ± 60 MPa
Bending Strength 76 ± 3 MPa
Impact Strength 26.6 ± 2.8 kJ/m²

Step 1 - Align Refill with Spool

  • Find the locator (a tiny block on the wide piece).
  • Align it with the notch on the inner ring of the filament roll.
  • Insert the wide piece into the filament roll.
Bambu Lab Refill Step 1
Bambu Lab Refill Step 2

Step 2 - Insert Narrow Piece & Lock In Spool

  • Insert the narrow piece and align the groove of each piece inside of the spool until it's pushed firmly into the wide piece.
  • Once it's pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.

Step 3 - Install Shim & Remove Strips

  • Install the spacing shim inside the spool (under the triangle)
  • Pull out the 4 plastic strips
Bambu Lab Refill Step 3

Questions View All Responses

Is Infinite Void Black PLA abrasive? Does it have a matte appearance?

View 1 Response

Would Pro filament work with Creality Ender 3

View 1 Response

Is MH Pro PLA compatible with the Raise3D E2 printer?

View 1 Response

Is "Antique White" semi translucent? Its the same that sent free with the Ender 3 printer?

Add Response

Concerning Product No. M-L76-6JVU, do you know what the RGB or Hex code is for this color? I'm looking for this color with these settings. PANTONE: PMS 208 C Hex Color: #630031; RGB: (99, 0, 49) Thanks.

Add Response

Why do you not describe the color properties of your filament with details like has sparkles or other add-ins? I got a roll of Antares Red and upon arrival found it had glitter in it where the images all depicted it as a solid crimson. Not what I was looking for.

Add Response

Everything seems to be out of stock. Is there something amis? Or just wait?

Add Response

I'm looking to buy this product. Can't seem to find anything like it, but I need it in 750g spool for Ultimaker S5. Could I get this order in 750g instead?

View 1 Response

Is the Jet Gray PRO Series PLA Filament - 1.75mm (1kg) consider as non conductive for electrical voltages up to 480v? If not is there a special filament that would meet this standard need to make s few custom insulator bushings for a 480v box.

Add Response

What are the recommended drying settings?

View 1 Response

Question.....do you guys carry or have this in a Dark Military Green and or a Dark Grey Green? need this color for the 1:6 scale Military projects that I am doing...........olive drab is to light and will not work on exterior purposes

View 1 Response

whats the difference between the infinite void black and black, will the particulate (as it seems to be) in the infinite void mask common imperfections from layers?

View 1 Response

Are either the electric pink PRO or the magenta MH Build fluorescent? Thanks

View 1 Response

What is the tare weight of the empty spool.

View 1 Response

Do you have tested filament profiles for use in PrusaSlicer?

View 1 Response

Curious about the lighting qualities of this product - do thin layers of white allow light through? Is it translucent when applied in thin layers? Looking to put an LED behind a thin layer of this filament.

View 2 Responses

Ask a question about this product

Back to top