BASF Black PRO Series PLA Filament - 2.85mm (5lb)

The materials experts at BASF have developed an exciting PLA in their engineering line: PRO1 PLA. This engineering thermoplastic is a high quality, tough PLA, excellent for printing tools, jigs and fixtures, as it boasts strengths above ABS, but which can be printed much faster and more easily--allowing you to make more, in less time, all while maintaining the reliability you need.

Price: $100.00 (with add-ons)
Availability: Only 1 left in stock.
Order Now:
Ships Today MatterHackers Shipping Truck Free U.S. Shipping - excludes Alaska and Hawaii
Qty
Add to wishlist
Product No. M-XXG-UM97
Color: Grey
Filament Diameter: 2.85mm
1.75mm
2.85mm

PRO1 provides the features of ABS with the ease of PLA

The materials engineers at BASF know that you need the performance of a stronger plastic such as ABS, but can't always iterate the way ABS can sometimes require. That's why they developed PRO1 to perform like ABS, while still printing quickly and smoothly like a high quality PLA should.

PRO1 offers major advantages above ABS and PLA:

  • Speed: Reduce your printing time by 30% - 80%.
  • Strength: Mechanical properties that are an improvement above ABS.
  • Versatility: Can be tuned to focus on speed, strength or a gorgeous surface finish.
  • Consistency: Will perform identically between colors and batches, every time.
Fastest Printing Strongest Structure Most Appealing Aesthetics
Print Temp 230 °C ± 10 °C 230 °C ± 10 °C 210 °C ± 10 °C
Print Speed 120 – 150 mm/s 120 – 150 mm/s ≤ 70 mm/s
Fill Density ≥ 20% ≥ 20% (higher = stronger) ≥ 20%
Fan Speed 100% 100% 100%
Top/Bottom Thickness 1.2 mm 1.2 mm (thicker = stronger) 1.2 mm (thicker = stronger)
Layer Height ≥ 0.1 mm ≈ 0.1 mm ≤ 0.1 (smaller = better)
Bed Temp 60 °C or non-heated bed with tape/glue 60 °C or non-heated bed with tape/glue 60 °C or non-heated bed with tape/glue

Documents

California Residents

Warning: This Product can expose you to styrene, a chemical known to the State of California to cause cancer. USE WITH ADEQUATE VENTILATION. See www.P65Warnings.ca.gov

Questions View All Responses

What's the tare weight of the spool?

Add Response

This material seems to have terrible warping through our e3d volcano extruder when printing at lowest temperatures and max fan, is this material especially sensitive to chamber temperature and/or humidity? Cheap amazon PLA's don't seem to have any of the same issues...

Add Response

In addition to my previous question, what is the diameter of the reel?

Add Response

Whats the print settings of PRO PLA vs normal PLA? 1. I see your suggested settings of 235°C (assuming nozzle, all layers); This seems high over other 'normal PLA', the Prusa PLA i just took off my machine ran good at 205-210. BUT i did notice your BUILD series PLA states [205±15°C]. So pro just needs to run hotter? 2. Suggested setting says "Print speed 15mm/s" - That seems VERY slow in comparison to Prusa generic PLA I was just running. Again, I checked your BUILD series PLA to compare... nothing is listed, can you provide some more finely tuned print settings? Problem; off the batt with a new 5lb spool this stuff is printing pretty accurately from what I can tell but is VERY stringy. I'm about to test some higher temps and will report back.

View 2 Responses

Am now using my 2# Robo3D Carbon PLA. My carbon fill nylon should be kept dry. How much must I desicate all my PLA filaments? Have lefdt PLA filaments out for some time with no apparent bad effects.

Add Response

what are the dimensions on M4S8S7TT? Spool diameter, width, true shipping weight?

View 1 Response

What is the spool thickness on these 10lb reels? Want to make sure the holder I make can fit these on it. Also, what is the hole diameter in the reel?

Add Response

Does this shrink less than the standard PLA when cooling? I don't see any mention of this specifically?

View 1 Response

Ask a question about this product

Back to top
Enter Your Zipcode

View availability and shipping options for this product.