BASF BASF Ultrafuse BVOH Support Filament - 1.75mm (0.5kg)

BASF has engineered a powerful water-soluble support filament with Ultrafuse BVOH, designed to allow complex geometries in your 3D prints by supporting bridging, then completely dissolving once your finished print is submerged in water, resulting in a clean print with no support to remove. The higher the water temperature, the faster Ultrafuse BVOH dissolves.

List Price: $82.00 (with add-ons)
Price: $79.00 (with add-ons)
Availability: Out of Stock Notify Me
Est. In Stock: Aug 8th
Notify me when this is available
Add to wishlist
Product No. M-QL9-NDTL
Filament Diameter: 1.75mm
1.75mm
2.85mm
Spool Capacity: 0.5 kg
0.35 kg
0.5 kg
0.75 kg
2.5 kg

BASF Ultrafuse Has Been Engineered from the Ground Up for Additive Manufacturing

BASF have long been experts in the materials world, designing thousands of powerful products for the manufacturing and engineering industries, across the globe, so stepping into 3D printing was the next step. Applying their experience to desktop manufacturing has resulted in dozens of  professional grade 3D printing filaments that perform well without a high barrier of entry. Whether you're firing up your first 3D print or iterating on an enterprise-level project, the Ultrafuse family from BASF is just what you need to succeed.

Print Complex Parts Using BVOH Support Material

By dual extruding with BVOH water-soluable support and your material, it suddenly becomes possible to overcome printing design challenges such as drastic overhangs, bridges, and multiple parts in one print. It adheres well to the bed during printing, then dissolves in water when printing is finished. Digitally fabricate the exact geometry you want from complex architecture models to multi-component assemblies and know BASF BVOH will provide the support you need to produce the best results.

Print Settings

  • Nozzle Temperature: 190 – 210 °C
  • Bed temperature: 60 – 100 °C
  • Bed Material:  Glass
  • Nozzle Diameter: ≥ 0.4 mm
  • Drying: 60 °C in a hot air dryer or vacuum oven for 4 to 16 hours
  • Compatibility: PLA, PRO1 Tough PLA, ABS, ABS Fusion+, PA and PAHT CF15

Click here to download the SDS.

Click here to download the TDS.

Questions

Will this work to cure 405nm resin? The wavelength of this light is 395nm

Add Response

How does the power output of this unit compare to the other similar peopoly unit listed on matter hackers. The price difference isn't small. Thanks

Add Response

Does this come with a U.S or European plug?

Add Response

Ask a question about this product

Back to top
Enter Your Zipcode

View availability and shipping options for this product.