Bondtech Bondtech CHT BiMetal M6 Coated Nozzle - 0.80mm

Please be aware of the following:

• Avoid Cold Change Of Bondtech CHT Nozzles

Copper is a soft material and doesn't withstand high mechanical efforts.
Before removing or tightening any Bondtech CHT nozzle, heat it up to 280C, or at least above 250C.
Use at most 1.0 Nm torque. Recommended Torque is 0.5 Nm.

• Nozzle Size limitation for fiber filaments

For Carbon or Glass fiber-loaded abrasive filaments use only 0.6, 0.8, and 1.0mm nozzle sizes.

• Nozzle size for particle filaments

For metal, wood, glitter, or other particle-loaded abrasive filaments you may use the 0.4mm nozzle size.

Bondtech CHT BiMetal Coated Nozzle Features:

• Copper body with hardened Vanadium Steel inserts and Nickel Coating
• Available sizes: 0.40, 0.60, 0.80, and 1.0mm.
• Optimized for 1.75mm filament but compatible with 2.85mm filament
• Requires 6mm wrench

Copper and Hardened Vanadium Steel Nozzle for Highflow Applications and Abrasive materials

BiMetal for highflow applications with abrasive materials

The Bondtech CHT BiMetal is designed to work with Carbon and Glass fiber composite materials with a higher melt capacity due to the increased surface area of the heating walls. Machined with ultra-precision and is made of a Copper body with Hardened Vanadium Steel inserts with Nickel coating. Flow Rate gains between 25 and 65% making this nozzle a competitive price/performance option. Increase your Max Volumetric flow with the Bondtech CHT BiMetal Nozzle!

the BiMetal Nozzles are then coated with Nickel

Compatible with the following blocks/printers

M6 / Reprap