Bondtech Bondtech QR Extruder Mount Dual Extruder for Lulzbot TAZ 5
MatterHackers Digital Designs are easy to access and ready to print within MatterControl.
Digital Design files can be accessed using MatterControl Software or MatterControl Sync. When logged in, Digital Designs can be found within the "Purchased" folder of your MatterControl Cloud Library.
This mount is specifically designed to attach two Bondtech QR Extruders to the Lulzbot TAZ 5/6.
Price: | $6.00 |
---|---|
License: | License To Make |
Instant Digital Delivery |
Print in ABS or PLA. Insert the heat-set threaded inserts into the bottom piece using a soldering iron. Use 3 screws to attach top piece and clamp extruders in place. Use the T-Slot fasteners to attach the mount to one of your printers rails. You will need to remove one of the printers corner brackets to insert the fastener into the rail.
The two end holes on the rear mount may need to be drilled in order to use M5 low head socket screws to attach to the printer. This is to ensure maximum stiffness on the mount.
Hardware Needed
Questions
Can you post a picture of how this looks connected to a Taz5?
I want to use Bond Tech Extruder for my taz5 3d printer. What settings should I change, such as firmware and extruder speed? please answer about my question.
Can you tell me how to attach the mount and cable to the TAZ 5 printer?
2 extruders on a taz6.... presumably this means you could print something using BOTH rigid (nylon) and flexible filaments.... how would you set this up?
How does this attach to my TAZ 5? Do I need to print a bracket? If I do, is it already created somewhere?
Price: | $6.00 |
---|---|
License: | loading |
Instant Digital Delivery |
How can you attach this mount to the printer's rails when these extruders have to move laterally on the x-axis? All of the rails on the Taz 5/6 that accept T slot connectors are rigid and stationary and part of the frame. Instead this mount has to attach to the carriage assembly that rides back and forth on the x-rails. Not sure what printer this is really designed for but it is clearly not going to work on a Taz 5/6 printer as shown. Perhaps the documentation you are presenting is wrong or key details are omitted.
Hey Billy D,
My apologies for the delay on this response, it looks like this mounts on the top of the Z gantry out of the way of the print head and all of it's movement. So this system mounts on the T-Slot frame. Please feel free to reach out to us through email or give us a call if you have more questions!