BuildTak BuildTak 3D Printer Build Surface 12" x 12" Square (Pack of 3)
BuildTak printing sheets are a terrific upgrade for any 3D printer. These sheets make both adhesion and removal of 3D printed parts a breeze. BuildTak is an ideal 3D printing surface for a number of materials including PLA, ABS, HIPS, PET, LAYWOO-D3, LAYBRICK, TPE, Ninjaflex, Taulman 910, Nylon 230, Bluprint, PCTPE, and many more!
List Price: | $62.70 |
---|---|
Price: | $62.70 |
Price: | $... |
Availability: | In Stock |
Order Now: | Ships Monday Free U.S. Shipping |
Size: 12" x 12" (304.8mm x 304.8mm)
Compatible 3D Printers include: Lulzbot Taz 4 & 5, Solidoodle Workbench, CR-10, Folger Tech FT-5, TEVO Black Widow
**Check out all the available shapes and sizes of the BuildTak family here!**
A UNIVERSAL CLASSIC
BuildTak printer sheets have been a favorite 3D printing surface for a variety of materials for over two years. These adhesive sheets come in a variety of sizes and shapes, so that they can be easily added to almost any 3D printer’s bed. BuildTak sheets offer excellent adhesion during 3D printing, and effortless removal of your finished 3D printed parts afterwards. They are a great alternative to PEI or Kapton tape, and BuildTak is THE surface of choice for 3D printing with Nylon and t-glase filaments, as they are compatible with glue stick.
After prolonged use, you may find that you need to clean your BuildTak surface with some isopropyl alcohol to renew its adhesion abilities. If your BuildTak sheet becomes damaged, just replace it with a new one!
MAXIMIZE YOUR MACHINE TIME WITH THE FLEXPLATE SYSTEM
Level up your 3D printing game to it’s highest potential by combining BuildTak sheets with the removable magnetic base BuildTak FlexPlate System! Instead of reaching into your 3D printer and removing parts there, you can now remove your FlexPlate from the entire print bed along with your finished 3D printed part. Take your FlexPlate and finished part to your chosen workspace, bend the FlexPlate in any direction, and your 3D print should effortlessly pop off of the BuildTak print surface. This simple upgrade to your 3D printer can make a world of difference. Once you experience the ease of using a FlexPlate with BuildTak, you’ll never want to print on anything else. Extra FlexPlates allow for even greater efficiency and versatility--grab one FlexPlate off the 3D printer bed, immediately attach another, and start printing again!
Questions
Is this compatible with the Raise3d Pro2 Plus build plate?
Will this work for MakeIt Pro-L?
Whats the temperature limit on these? I have one and im getting bubbles between the spring steel and the build surface while printing ABS, I have my bed temp at 100°C
Hi, is this different from the Flexplate system or is it replacements for the Flexplate system? Is this removable or will it stay adhere to the aluminum plate? I am looking to upgrade from blue tape to something a bit less wasteful. Thanks!
Does this one fit to AnyCubic Mega-X?
Can these be cut? I have a new sovol01 and it has a different bed size than the ones you sell 300x280
I have a BIQU Thunder printer. The heated printbed is 12"x12". So the Printer Build Surface is all I need to order? 3-pack is too many but that's OK.
Any problem with this fitting the 300x300 build area of a Wanhao Duplicator 9 MK 2? Also how are they applied to the existing build surface and are they easily removable?
Does this fit the Raise N2 Plus Printer? I heard they require 13x13.
could i use these on the Lulzbot taz 6
Can I use induction sensors with buildtak?
Could these sheets to be used on for the Z18 Makerbot machines? Also, do they have any adhesive in the back of them to adhere to the build plate?
Is there a specific temperature the heated bed needs to be cooled to for part removal? Or is that based on the filament rather than the bed material?
does this work with PLA
Do I still need to apply ABS slurry to help ABS stick?
How thick is it? 12 x 12
Is it possible to get a 220 mm X 270 mm or 8.66 in by 10.62 in Variant of this??