BuildTak BuildTak Extra FlexPlate 19.7" x 19.7"
The BuildTak FlexPlate System makes removing finished 3D prints from the print bed easier than ever. When a print is finished, the FlexPlate along with the BuildTak sheet slide right off the magnetic base. With a gentle twist, your finished 3D printed part should pop right off!
This listing is an additional FlexPlate, which enables you to alternate build surfaces on your printer and maximize machine uptime. When one part is done, remove the FlexPlate, install the other one and start your next 3D print job immediately!
List Price: | $85.50 |
---|---|
Price: | $85.50 |
Price: | $... |
Availability: | Only 3 left in stock. |
Order Now: | Ships Today Free U.S. Shipping |
Size: 19.7" x 19.7" (500.38mm x 500.38mm)
Compatible 3D Printers include: Creality CR-10 S5
Note: This listing is for an additional FlexPlate only - intended for those who already own the standard FlexPlate System. This listing includes only an additional FlexPlate without any BuildTak surface sheets. The base FlexPlate System includes one sheet, see product add-ons to add BuildTak sheets if you need more!
**Check out all the available shapes and sizes of the BuildTak family here!**
SIMPLE UPGRADE, BIG RESULTS
BuildTak Sheets have been a favorite 3D printing surface for over two years, and the FlexPlate System makes utilizing BuildTak even easier. Available in a variety of sizes to fit all kinds of 3D printers on the market, simply install the Magnetic Base on top of your 3D printer’s existing print bed, adhere a BuildTak sheet to the FlexPlate, and magnetically attach the FlexPlate to the Magnetic Base. After your 3D print is finished, the FlexPlate with the BuildTak sheet can be easily detached from the print bed, flexed in any direction, and with a gentle twist, your 3D printed part should separate from the print bed cleanly. Replace the FlexPlate back onto the Magnetic Base, and you're ready to print again!
The BuildTak FlexPlate makes removing prints quick and easy!
MAXIMIZE YOUR UPTIME, AND DIVERSIFY YOUR OPTIONS
The BuildTak Sheets have vastly improved your 3D printing experience, with their awesome part adhesion and easy part removal, but you can take the BuildTak 3D printing experience even further with the use of additional FlexPlates. By installing the BuildTak Magnetic FlexPlate System, you can create a suite of amazing print bed surfaces, each on a different FlexPlate, and then swap them out with ease. As soon as a part is finished printing, pull the entire FlexPlate off the magnetic base, then snap a clean FlexPlate into place and start printing immediately! Switch between a standard BuildTak sheet, a PEI BuildTak sheet, or even a LayerLock Garolite Print Bed as easily as you would switch between different 3D printing materials like PLA and PETG! Bring downtime to a minimum, and hone in your print bed surface with the BuildTak FlexPlate system and a BuildTak Extra FlexPlate. Once you go 'Tak, you'll never go back.
Questions
Hi with the filament sensor can it be programed to go to the next roll and keep on printing ? thanks
Where I work there's a very high requirement for safety. I'm trying to determine what safety features this printer has. Can anyone give me a list of things that this does to make it safe to operate, especially unattended?
Will this ship directly from Matterhackers or from Bambulabs in China?
What supported options are there for printing with soluble support - that isn't PLA + PVA? My print jobs tend to be functional engineering models. PLA is too brittle and temperature sensitive for this. I need a soluble support solution for materials like PETG, ASA, Nylon & PC.
Does the enterprise bundle come with the normal Bambu bundled filaments and spools. I believe it’s a sample of their support filament and a couple others that come with the AMS combo. Plus you’re adding in the bud plate, extra nozzle and three rolls of PLA?
Please provide a quote and order assistance for a Bambu Lab X1-Carbon Combo Bundle (3D Printer) Here's the link: https://www.matterhackers.com/store/l/bambu-lab-x1-carbon-combo-3d-printer/sk/MKHR486R
HMS_0300-0300-0001-0001: The hot end cooling fan speed is too slow or stopped KEEP GETTING THE ABOVE MESSAGE EVEN AFTER REPLACING WITH TWO NEW ONES
What is the correct water soluble material to use for support when printing with PETG? I am cuurently using Aquasys 120 water soluble material for support and it does not adhere. Using your X-1 Carbon printer.
Hello, I am looking at a purchase of either a Bambu lab X1C or X1E. Can you give me a definitive answer please; Can the X1C connect to a LAN and not have to use a memory card or Bambu Cloud service? The reason I ask is because on Bambu website it says about the X1C, " we support SD card and local network to print the projects", but on your page it say No LAN for the X1C. What is a "Kill Switch" please? You have it listed for the X1E. Thank you
Do the MH build and pro spools fit into the AMS safely?
does the hydra come installed when bought as a package?
I purchased the professional bundle which came with 3 rolls of the NylonX filament but I haven't been able to find any recommended settings for using this filament on this printer. Cany you please advise? Thanks
Does abs hydra ams ONLY work for abs or can it do pla and others
I am interested in the Carbon X professional package. Can you confirm what filament spools come with his package?
The Bambu company offers a 14-30 day warranty on their website. What exactly do you cover for a year please.
I am interested in purchasing this printer for my company. I work in an area that does not allow the use of bluetooth or wifi. Do you know if those modules can be disabled on this printer? If so, can it still function through ethernet or USB? Thank you,
Do these bundles include the Engineering Plate? The versions available off the Bambu website seem to have 2 build plates included (Cool Plate and Engineering/Hot Plate). I'm somewhat confused by the apparent differences.
Since the engineering and professional bundles include nylonx, which build surface is used to print that material/does the bundle include the build surface needed to print that material? Reading the description of nylonx: it requires garolite or glass?
What is the "1 x MatterHackers Launchpad (MatterHackers Block)" that is included in the bundles?
Launchpad from what I can tell, is an hour of face to face time over chat with a Matterhackers specialist. Basically if you come up on a problem you can't solve yourself through research or tinkering.
Launchpad is a one-on-one virtual session with one of our engineers. They will go over how to get started with the printer, the ins and outs of the hardware and software, maintenance and materials, and ensure you are successful with your first print. Message us at sales@matterhackers.com to learn more.