BuildTak BuildTak FlexPlate System 13.07" x 13.39"
The BuildTak FlexPlate System makes removing finished 3D prints from the print bed easier than ever. When a print is finished, the FlexPlate along with the BuildTak sheet slide right off the magnetic base. With a gentle twist, your finished 3D printed part should pop right off!
| List Price: | $119.00 |
|---|---|
| Price: | $119.00 |
| Price: | $... |
| Availability: | In Stock |
Size: 13.07" x 13.39" (331.98 mm x 340.11mm)
Compatible 3D Printers include: Raise3D N2, Raise3D Pro2
**Check out all the available shapes and sizes of the BuildTak family here!**
SIMPLE UPGRADE, BIG RESULTS
No matter the shape, size, or design of your 3D printer, adding a BuildTak FlexPlate System converts it to a removable print bed system. Instead of reaching into your 3D printer and removing parts there, you can now remove your FlexPlate from the entire print bed along with your finished 3D printed part. Take your FlexPlate and finished part to your chosen workspace, bend the FlexPlate in any direction, and your 3D print should effortlessly pop off of the BuildTak print surface. This simple upgrade to your 3D printer can make a world of difference. Once you experience the ease of using a FlexPlate with BuildTak, you’ll never want to print on anything else.
MAXIMIZE YOUR MACHINE TIME
BuildTak Sheets have been a favorite 3D printing surface for over two years, and the FlexPlate System makes utilizing BuildTak even easier. Available in a variety of sizes to fit all kinds of 3D printers on the market, simply install the Magnetic Base on top of your 3D printer’s existing print bed, adhere a BuildTak sheet to the FlexPlate, and magnetically attach the FlexPlate to the Magnetic Base. After your 3D print is finished, the FlexPlate with the BuildTak sheet can be easily detached from the print bed, flexed in any direction, and with a gentle twist, your 3D printed part should separate from the print bed cleanly. Replace the FlexPlate back onto the Magnetic Base, and you're ready to print again!
The BuildTak FlexPlate makes removing prints quick and easy!
WHAT’S IN THE BOX?
- 1 x BuildTak Sheet
- 1 x BuildTak FlexPlate
- 1 x BuildTak Magnetic Mounting Base
Questions
What is the mechanical properties of this ABS like Elasticity Modulue and poissons ratio and density?
What are dimensions of reel. Will it fit in the Ultimaker material handler?
What would cause layer separation? Print temp 250 C Bed temp 90 C (max of my printer) Speed 60 mms Cooling ON
What are the mixing proportions of the ABS?
All I can add is that I'm testing my luck with a CR6Max. Here's the trick to adhesion... ---- I maxed out the OEM settings at 260/90 and run my 1st layer SLOW. As in 10 slow. ---- Only using glue on a glass bed and after the 1st layer adheres she's running. Benchy came out 9.5/10 first attempt, first ABS print ever.
Is it food, microwave and dishwasher safe?
Why is this filament so difficult to print with? I'm running a heated enclosure @ 45C, printing at 235C, with a heated bed of 110C. Printing small 1-2 inch parts on a level/clean bed with proper first layer leveling and I'm getting absolutely awful warping that ruins the prints. So far I can't see anything PRO about this filament.
Hey! I just wanted to see if you had any pictures comparing this (MH Pro Series Purple) compared to the Build Series Purple. The Pro looks a bit more matte and lighter in hue than the Build--something I've been looking for!
My build recommends esun pla+, or esun abs, I am looking for maximum shock/impact resistance, with maximum layer adhesion, not concerned with cost of filament, in other words not looking for the bargain filament on this build. My question is the pro series better than esun filament?