BuildTak White Green MatterHackers Quantum PLA Filament - 1.75mm (0.75kg)
BuildTak's Spatula is designed with 3D printing in mind to make your print removal a breeze! The handle is made with a durable, ergonomic rubber grip and is designed at the perfect angle for optimum control. The stainless steel blade has a thin front edge ideal for separating finished prints from your print bed with minimal force required. With every spatula scrape you asked for easier print removal, and BuildTak has answered with the Print Removal Tool.
| Price: | $42.00 (with add-ons) |
|---|---|
| Availability: | In Stock |
| Order Now: | Ships Tomorrow Free U.S. Shipping |
The BuildTak Spatula is one of the first removal tools designed specifically for 3D printing. This awesome tool features an easy-to-grip handle, a rigid stainless steel blade, and a thin front edge perfect for getting under your prints. The blade is also designed to be safe for all BuildTak sheets, so your printing experience can be elevated to perfection, simply by using the BuildTak ecosystem.
Questions
You mention and alignment coin, where can I find that?
How many meters of filament is in one roll?
the colors are beautiful. Can we buy in France? where can we find the stl of the mandala?
What does the empty spool weight?
What is the density of this material?
What are the material properties for this filament? Can we get a spec sheet?
I have used the filament in a 0.4 nozzle configuration and love the color change. Will I get the same effect with a 0.2 nozzle or is it too small for the application? I would like to know prior to changing the nozzle as it is an ordeal. Thank you in advance.
Is this filament abrasive on a brass nozzle?
Is this similar to a Silk PLA? If so, does it have the same layer adhesion issues?
Love the color! I was wondering if you have a color that is similar or the exact color of the raspberry?
What are the results when using a volcano hot end? It says it may reduce effect.. is it worth trying or will it just totally mix it?
Will this filament type every be available as TPU? THANKS!
1: Will this be available in refill packs? 2: Could something like this be made in ABS?
I would like to know where to find the file for the skull in the puddle!
Is It the same as Magic Silk PLA ?
I noticed you recommend smaller hot ends. Will this filament work on the ender3 v2 neo and/or the Flashforge Finder?
Good morning Is your Quantum Iridescent and silky PLA compatible with makerbot replicator+ printers? Thank you in advance. Savino Capizzi
What is the density of the filament in g/cm3?
Is this able to be used on a Makerbot Replicator+ with the experimental smart extruder?
What is the model used for the skull bottle and where can I find it?
Would like to see some sample or assortment packs, say, four 1/4kg rolls of different color combos.
Will this work with the Ultimaker s5?
What is the difference between the two sizes
Where I can find the file of the Star (with different infill patterns) you have pictured above? I just got my roll of blue/green quantum and I want to print cool things!
Can we get something like this in a TPU? Would love to print drone parts in a quantum color
Is there a way to influence the layout of the color change, or will it always tend to be in a left-right orientation? Can it be, for example, one color when you look at it from aboce and another from below?
It's the STL for the vase available?
do you have a filament profile?
For me, this worked in the generic PLA setting.
The green/blue stuff I've had nothing but problems with. 240C/60C bed, it would just randomly jam. Sometimes after the first layer, sometimes five hours into a print. It almost behaved like there was some kind of solid contaminant in the filament - I'd push a higher melting point filament through, I'd get a tiny pop and it would flow again until a random interval passed and it would jam up.
Ran through my filament dryer 5 times, 6 hours @65C.
Usings Prusa Mini, 225 first layer and 220 on worked for me
For me, using a Tungsten Steel Nozzle, I couldn't get a successful print using 210-220c. It would not lay correctly and fail (and yes, my bed was trammed, z-offset was correct, and my ABL was on).
I finally had to print at 35-40mm/sec, @ 230c, and the bed at 50c to get a successful print.
Same problems with the hardened steel nozzle. 215/60 on a Prusa MKS3+ didn't work. 2 failed prints in a row.
I've been having a lot of trouble trying to get it to print. I tried RLovrin1's suggestion, and it works perfectly. So if you have trouble, def try "35-40mm/sec, @ 230c, and the bed at 50c"
I have also been getting clogs and jams at the recommended parameters (227°/50°) with quick-to-somewhat-quick PLA printing speeds. Like the last person mentioned, when I pulled out the most recent clog, there appeared to be some sort of fibrous material sticking out from the part of the clog that conformed to the shape of the nozzle--almost like little micro-fibers. Maybe there is some sort of middle separation layer they are using to keep the two colors from mixing with one another when the filament is extruded on their machines? It will probably be necessary to use slower speeds, less retraction if possible, and maybe higher temps.
Super fillament! Respect
Supe'r fillament! Respect