USSynthetic Silver PRO Series PLA Filament - 2.85mm (10lb)
Print high precision parts out of any material using the strongest substance on earth: diamond.
Top DiamondBack High Performance Nozzle Features:
• Prints any filament—nozzle changes are a thing of the past
• Improved print quality and layer adhesion thanks to excellent thermal conductivity
• Greatly reduces filament clogs and is easy to clean
• Perfect wear resistance—the nozzle that lasts a lifetime
• Compatible with V6-style or Mk8-style hotends
Price: | $195.00 (with add-ons) |
---|---|
Availability: | Only 3 left in stock. |
Order Now: | Ships Today Free U.S. Shipping |
The Diamondback Nozzle
An Indestructible, All-Purpose, 3D Printing Nozzle
The DiamondBack Nozzle is the single-solution nozzle that improves print quality across any material, and lasts beyond any other material.
Here are the key features of the DiamondBack Nozzle:
- Prints any filament--nozzle changes are a thing of the past
- Improved print quality and layer adhesion thanks to excellent thermal conductivity
- Greatly reduces filament clogs and is easy to clean
- Perfect wear resistance--the nozzle that lasts a lifetime
- Compatible with all V6-style hotends or Mk8-style hotends
- Made in the USA
Technical Specifications
- V6 Compatible
- Thread Type: M6x1.0
- Thread Length: 7.6mm
- MK8
- Thread Type: M6x1.0
- Thread Length: 5mm
Operating Tips
- Recommended torque specs: 2.5 Nm (Newton Meter)
- Recalibrate z-offset after install to protect print bed
- Run temperature tower as optimal temperatures are typically lower
- Recommended start temperatures:
- PLA: 200°C – 215°C
- PETG: 230°C – 250°C
- PETG Carbon Fiber: 245°C – 265°C
- Maximum temperature 300°C
Questions
This material seems to have terrible warping through our e3d volcano extruder when printing at lowest temperatures and max fan, is this material especially sensitive to chamber temperature and/or humidity? Cheap amazon PLA's don't seem to have any of the same issues...
In addition to my previous question, what is the diameter of the reel?
Whats the print settings of PRO PLA vs normal PLA? 1. I see your suggested settings of 235°C (assuming nozzle, all layers); This seems high over other 'normal PLA', the Prusa PLA i just took off my machine ran good at 205-210. BUT i did notice your BUILD series PLA states [205±15°C]. So pro just needs to run hotter? 2. Suggested setting says "Print speed 15mm/s" - That seems VERY slow in comparison to Prusa generic PLA I was just running. Again, I checked your BUILD series PLA to compare... nothing is listed, can you provide some more finely tuned print settings? Problem; off the batt with a new 5lb spool this stuff is printing pretty accurately from what I can tell but is VERY stringy. I'm about to test some higher temps and will report back.
Am now using my 2# Robo3D Carbon PLA. My carbon fill nylon should be kept dry. How much must I desicate all my PLA filaments? Have lefdt PLA filaments out for some time with no apparent bad effects.
what are the dimensions on M4S8S7TT? Spool diameter, width, true shipping weight?
What is the spool thickness on these 10lb reels? Want to make sure the holder I make can fit these on it. Also, what is the hole diameter in the reel?
Does this shrink less than the standard PLA when cooling? I don't see any mention of this specifically?
What's the tare weight of the spool?