USSynthetic DiamondBack High Performance V6 Compatible Volcano Nozzle - 1.75mm x 1.00mm
Print high precision parts out of any material using the strongest substance on earth: diamond. These nozzles are the Volcano-style. Designed to print large layer heights at lightning fast speeds, you will experience a huge reduction in print times with the Volcano line. And with the pure-diamond tip, clogs and wear are no longer a factor.
Top DiamondBack High Performance Nozzle Features:
• Prints any filament—nozzle changes are a thing of the past
• Improved print quality and layer adhesion thanks to excellent thermal conductivity
• Greatly reduces filament clogs and is easy to clean
• Perfect wear resistance—the nozzle that lasts a lifetime
• Volcano design offers aster print speeds and larger layer heights
• Compatible with V6-style hotends
| Price: | $159.00 (with add-ons) |
|---|---|
| Availability: | In Stock |
| Order Now: | Ships Tomorrow Free U.S. Shipping |
The Diamondback Nozzle
An Indestructible, All-Purpose, 3D Printing Nozzle
The DiamondBack Nozzle is the single-solution nozzle that improves print quality across any material, and lasts beyond any other material.
Here are the key features of the DiamondBack Nozzle:
- Prints any filament--nozzle changes are a thing of the past
- Improved print quality and layer adhesion thanks to excellent thermal conductivity
- Greatly reduces filament clogs and is easy to clean
- Perfect wear resistance--the nozzle that lasts a lifetime
- Compatible with all M6 Volcano-style hotends
- Made in the USA
Operating Tips
- Recommended torque specs: 2.5 Nm (Newton Meter)
- Recalibrate z-offset after install to protect print bed
- Run temperature tower as optimal temperatures are typically lower
- Recommended start temperatures:
- PLA: 200°C – 215°C
- PETG: 230°C – 250°C
- PETG Carbon Fiber: 245°C – 265°C
- Maximum temperature 300°C
Questions
can you tell me what ABS brand and specific "red color" was used for printing the accent parts? I need to reprint a part that I messed up on and would like to match it to the rest of the parts for the color.
can you tell me what ABS brand your printing these parts in so I can get extra to print the rest that I need
Does the Nevermore Printed Parts come with this? How about Printed clicky Probe parts?
Are there supplemental instructions from Matterhackers (or someone) for the assembly of the extruder (Clockwork 2 + Stealthburner)? Some of the printed parts look radically different from the linked assembly notes in LDO's documentation. I cannot tell where the heatset inserts are supposed to go, and I cannot even tell if I have all the printed parts needed to assemble the kit (I have all the parts on the provided BOM, but the BOM has left out a few parts before - like the bed supports and the pulley jig)