i3D Dimafix 3D Printing Adhesive Pen
Dimafix Pen is the ideal 3D printer adhesive for BASF Ultrafuse 316L metal 3D printing filament as well as polycarbonate filament on glass. The Dimafix Pen provides various bed adhesion characteristics depending on your 3D printer's bed temperature. Dimafix Pen does not contain any gas and is environmentally friendly. After use, close and store Dimafix bed adhesion pen properly.
List Price: | $26.95 |
---|---|
Price: | $26.95 |
Price: | $... |
Availability: | In Stock |
Order Now: | Ships Today |
A 3D Printing Adhesive with great features
- Easy to use
- Avoid warping
- Completely water-soluble for easy cleanup
- Over 100 applications possible
- Works great with polycarbonate on Glass
- Ideal for use with BASF ultrafuse
How to use Dimafix Adhesive Pen with your 3D printer
- Shake pen before applying to the base
- Apply to bed at room temperature
- Wait for the print surface to dry and heat the bed
- Keep print bed temperature above 85C during printing
- After printing, wait for print bed to cool down and remove your 3D print
- After use, close and store properly
Get different adhesions with Dimafix pen allowing you to print from simple to complex 3D prints
Below 60ºC: Low adhesion, the objects can be detached from the plate.
60 - 75ºC: Average adhesion, for simple prints
75 - 95ºC: High adhesion, for complex geometries and lengthy prints
Above 95ºC: Very high adhesion, for very complex geometries and very lengthy prints
This chart showcases different print bed temperatures can result in different levels of adhesion
Dimafix Pen Material Safety Data Sheet
Dimafix Pen Technical Data Report
Questions
Would you please provide a contact phone number to discuss questions I have regarding use of this cutter for cutting fabric. Currently use a Brother ScanNCut machine, but would like to explore laser cutting fabric pieces instead.
What would a 500mm thick concrete paver look like after being etched? How much material would be removed? Thank you, Don Mensch
can you cut 1/8 plexiglass into sewing templates with this?
I have some stone bases that are 13 by 13 inches and 1.25inches tall that I wish to engrave. Will they work with the machine? I also have some stainless tube to engrave that is 1.5 inches diameter and about 5inches long. Will that work with the rotary add-on. Can you also engrave or etch carbon fiber tube? Thanks William
Will I have to purchase anything else to start creating day 1?