E3D E3D PT100 Temperature Sensor Cartridge
The E3D PT100 Temperature Sensor can be used in place of a thermistor for E3D's All-Metal HotEnds, and is compatible with E3D's new cartridge-style heater blocks. PT100's are able to measure temperatures up to 400 C, and are more accurate than most thermistors and thermocouples.
| List Price: | $21.00 |
|---|---|
| Price: | $21.00 |
| Price: | $... |
| Availability: | Out of Stock Notify Me |
| Est. In Stock: Mar 31st | |
E3D PT100 Temperature Sensors are a great replacement instead of a thermistor, and measure higher temperatures at greater accuracy than most standard thermistors and thermocouples. E3D PT100's are compatible with E3D's new cartridge-style heater blocks.
PT100 Temperature Sensors require your electronics to support RTD Sensing devices, or you will need an amplifier board (sold separately).
Questions
will this filament work with normal PLA settings?
Is this filament suitable for high-stress components, like gears? how hard is it?
im thinking of printing something that makes contact a lot how is the impact resistance on a fully finished print?
The finishes in all the sample sculptures above are different . Is this due to printing temperature , or due to sanding and polishing techniques used ? My favorite is the ring . What's the finish technique used ?
Is the dielectric constant of this filament known? Thanks!
Is it possible to use this material in a low end 3d printer like an ender 3 pro?
Can you provide a link to an stl file of the skull? Is it on thingiverse?
Why does this listing state only 40% bronze powder when other listings for ColorFabb BronzeFill state that it has 80% bronze powder?
Compatible with lulbot taz6 ...?
Does this filament feel like metal? A client asked me to 3D print a pediment and the sample they gave me was 3D printed and it feels like metal.
I am running a Prusa i3 MK3. I am trying to print some rings with my nozzle set to 220c and heat bed at 60c and speed set to 60%. The settings for the ring are extra detailed with 30% fill and supports from heatbed only. I notice that the material comes off the heat bed very easily and clumps on the nozzle. Ive never run into this type of issue for normal types of PETG or PLA. Is there something special I need to do for this material to print successfully?
Is it possible to use a E3D V6 0.25 mm nozzle to print with this bronze filament?
Will this material print on the m3d micro?
Do you need a hardened nozzle to print with this filament?
will this work with the anet 8?
Is ColorFabb compatible with Makerbot 3D printers?
Is it possible to use chrome plating or a similar process to make the surface look like "real metal"?
Your answer for no on conductivity makes me ask, how many ohms per foot is this material?
Will this work with the da vinci 1.0?
Will the bronze fill work as a printed bushing?
Is 3D bronze printing of 12" high sculpture economically feasible? Can it replicate the detail that lost wax casting provides?
Do you need a specific kind of hot end to use this filament?
How well does the bronze filament hold up for outdoor applications?
What are the properties of the printed object i.e. melting point etc
Does the addition of bronze particles with the PLA make the printed item more thermally stable, meaning less sensitive to warping in hot weather?
How much length of filament is in a roll compared to a standard 1Kg roll of PLA?
Will this work on a replicator 2?
Will the metal in this filament wear down my extruder?
Have you printed the bronzeFill filament on a Rostock Max with the stock hot end?
Are prints heavy, like bronze? and about thermal conductivity - do prints feel cold - like metal?
I have the Raise3d Pro2 Plus and cannot run this material. I tried 200C at 50mm, 205C, 210C, 215C. and tried 60mm and 75mm and could not get a print. I clogged the nozzle and the upper extruder numerous times. I am using a hardened nozzle. I would think it would need a low temp. since it is metal and the heat transfers through the filament where the extruder gear is and would soften the filament and cause slipping. Everthing I've tried has not worked. Perhaps this spool is defective and I need a refund.
Hey Alex C.,
If you could drop us an Email at Support@matterhackers.com we can look into some possibilities with you. Being that the Pro 2 is a new machine and they do not yet have profiles for a number of different filaments we will need to look into settings first.
Thanks!
Has there been any progress with this bronze material on Raise3d pro2 plus? I am very interested in this material but not if Alex C is still struggling with it?
To my knowledge, there is not an issue with running this material on the Pro2.