E3D E3D RapidChange Revo Hemera Upgrade Kit
Upgrade your E3D Hemera Extruder and Hotend with the E3D RapidChange Revo Upgrade Kit. The Revo Ecosystem enables your to enhance your Hemera with easy nozzle swaps without having to hot tighten or use a tool. This upgrade is simple and easy, you can simply swap out your current heat since and attach the Revo Heatercore.
Availability: | Currently Unavailable |
---|
Features of the E3D Revo Hemera Upgrade Kit
- Super easy upgrade, simply swap out the old Hemera heatsink for the Revo Heatercore.
- Revo Heatercore adds compatibility for the Revo Nozzles
- A choice between a single nozzle (0.4mm nozzle) or a fully loaded nozzle kit which includes the 0.25mm, 0.4mm, 0.6mm, & 0.8mm nozzles.
What's included in the kit
- 1 Revo Hemera sink
- 1 Revo HeaterCore
- 1 Revo HeaterCore spring
- 1 Extension cable kit
- 1 Revo nozzle 0.40 or 1x 0.25, 0.40, 0.60, 0.80
At MatterHackers, to bring you new and exciting products, we occasionally shift some of our quality stock to the Clearance section.
Reasons for Clearance Items:- New Product Versions: When manufacturers release updated versions of printers, CNC machines, filament, etc., the older versions typically go to Clearance.
- Overstock: Items we have in excess are moved to Clearance to free up warehouse space.
- Discontinuation: Discontinued product lines often end up in Clearance to expedite the sale of remaining stock.
- Packaging Changes: When packaging updates occur, we shift the older packaged items to Clearance.
- Poor Quality: Clearance items meet our rigorous quality standards and often brand new, unopened products.
- Limited Support: You'll receive our excellent customer service for Clearance items. Note, all Clearance purchases are Final Sale and not covered by the MatterHackers Return Policy.
Note, all Clearance purchases are Final Sale and not covered by the MatterHackers Return Policy.
Questions
these are really nice. Only problem i have is the adhesive on these doesn't seem to last. ABS sticks to this stuff just fine, BUT, the adhesive lifts after awhile and bubbles up the BuildTak. Then it's uneven and useless. Any tricks to make the adhesive more sticky or even more permanent. That'll do wonders for me. I've already bought 3 sets of these, including the PEI and they all do the same. I can make these things last forever. Maybe i should try sticking it to an alum plate instead of glass.
How do you remove the build surface when you need to replace it?
Can these be cut to fit a 200mm Diameter bed?
Will this fit the Rostock Max V3?
Will these sheets be put onto the borosilicate glas plate or directly on the heating bed?
can you use the Magigoo on these? or would you even need to?
Depending on the material. Generally, BuildTak doesn't require additional adhesives.