E3D E3D RapidChange Revo Six V6 Hotend Kit
The E3D Revo V6 is an updated version of the E3D V6 with enhanced performance. It is compatible with Revo Nozzles and uses a Revo HeaterCore, which reaches temperature much faster than a traditional aluminium heaterblock. It is also safer, with a positive temperature coefficient (PTC) that prevents melting at extreme temperatures. The anodised black heat sink and included crystal-clear fan duct give the Revo V6 a distinctive look.
- HeaterCore reaches temperature much faster than a traditional aluminium heaterblock
- PTC means the HeaterCore can't melt at extreme temperatures
- Ships with a premium crystal-clear fan duct
Availability: | Currently Unavailable |
---|
Key features of the E3D Revo V6
- Max temp: 300C
- Works with Revo HeaterCore and Revo Nozzles
- Mounting system: Groove mount
- Dimensions:
- Diameter: 16.2mm
- Length 62.4mm
- Voltage: 12V or 24V
- Material compatibility: 1.75mm
No machine redesign. Revo Six is a top choice if you want to update your old E3D V6 setup to the latest generation of E3D HotEnd technology. It has the same height, the same diameter, and the same groove mount as the E3D V6, so it drops straight into V6-fitted machines without the hassle of redesigning print head mounts and accessories. Just fit it, connect the Revo HeaterCore, and you’re ready to 3D print.
Ready for Revo. Revo Six is designed to work with Revo Nozzles, so you can perform nozzle swaps with your fingers at room temperature without complex tools or hot tightening. Each Revo Nozzle is factory sealed, making it much simpler to use and more reliable than most HotEnd technology available today.
Enhanced performance. Revo Six uses a Revo HeaterCore, the latest HotEnd heating and sensing architecture. It reaches temperature much faster than a traditional aluminium heaterblock, and it’s much safer: a positive temperature coefficient (PTC) means the HeaterCore can’t melt at extreme temperatures, reducing hazards in the event of a thermal runaway.
A new look. An anodised black heat sink distinguishes Revo Six from its predecessor, and every unit ships with a premium crystal-clear fan duct so your machine will stand out from the crowd.
At MatterHackers, to bring you new and exciting products, we occasionally shift some of our quality stock to the Clearance section.
Reasons for Clearance Items:- New Product Versions: When manufacturers release updated versions of printers, CNC machines, filament, etc., the older versions typically go to Clearance.
- Overstock: Items we have in excess are moved to Clearance to free up warehouse space.
- Discontinuation: Discontinued product lines often end up in Clearance to expedite the sale of remaining stock.
- Packaging Changes: When packaging updates occur, we shift the older packaged items to Clearance.
- Poor Quality: Clearance items meet our rigorous quality standards and often brand new, unopened products.
- Limited Support: You'll receive our excellent customer service for Clearance items. Note, all Clearance purchases are Final Sale and not covered by the MatterHackers Return Policy.
Note, all Clearance purchases are Final Sale and not covered by the MatterHackers Return Policy.
Questions
Does the fully loaded kit include the regular or high flow brass nozzles?
Is this compatible with the Pulse XE D-124? If so, does it require any modifications?
Will it fit anycubic vyper
I have a Sovol SV01. It looks like this will fit, but I am worried about the firmware. Will I have to change firmware. I have a CR-touch, will that mess anything up?
How can I tell if my machine requires a 12 or 24 volt kit?
Can you identify somewhere what the fully loaded vs single nozzle kit is? I'm assuming it's more nozzles, but which ones come with it?
Does the kit come with the extension cables?
This kit comes with two 1-meter plus long extensions for the heater cartridge and the thermister. The heater cartridge extension is black 20AWG wire and has crimped ferrules on one end and 2-Pin Molex micro-fit 3.0 male connector on the other end.
The heater cartridge and thermister have 2-pin Molex Micro-fit 3.0 female connector.
The thermister extension is white 22AWG and has 2-pin Molex micro-fit 3mm male connector at one end and a 2-Pin Molex 2.54mm female connector.