E3D E3D v6 Gold HotEnd Fully Assembled - 1.75mm (24v)
An upgraded and already fully assembled E3D v6 Gold HotEnd that is more than just flashy. It is upgraded with some of E3D's best components at a lower price than purchasing all the individual components.
List Price: | $119.90 |
---|---|
Price: | $119.90 |
Price: | $... |
Availability: | Only 1 left in stock. |
Order Now: | Ships Tomorrow Free U.S. Shipping |
Beautifully Designed
The luxury HotEnd to rule all HotEnds. Yet the new Gold HotEnd is not just a visually beautiful tool, their is power in its beauty that we will go into. But we can't ignore the stunning complement the gold heatsink and clear fan duct make. The gold anodized heatsink has the same design but with a gorgeous finish.
Fully Assembled Gold HotEnd
Metal Upgrade
The anodized gold heat sink is just the most obvious change in the new and improved hotend from the previous all aluminum build. The heat block has also been improved with a plating of copper-alloy which increases heat transfer and reduces filament stickiness. This also decreases the bulkiness since no sock is needed. The hardened steel nozzle replaced the typical brass nozzle which better stands up to abrasive materials.
Improved Extrusion
All these component improvements make for higher precision prints. The standard heaters are replaced with the upcoming high precision, quick release heater cartridges. Spot-on physical dimensions and electrical specifications guarantee perfect performance. Quick release also makes tinkering with your HotEnd a breeze - easily swap between the v6 and Volcano heater blocks for the ultimate modular hotend package.
Complete Hotend
Metal Parts:
- Special Edition Gold Anodised Heatsink
- 1.75mm Stainless Steel Heat Break
- 1.75mm x 0.4mm Hardened Steel V6 nozzle
- Plated Copper Heater Block
Electronics:
- Thermistor Cartridge
- 30x30x10mm fan (24v)
- Connector Cable (2)
- 30W High Precision Heater Cartridge (24v)
- Fibreglass Insulated Heater Connector Cable
Additional:
- Fan Duct
- Silicon Sock
- Fixings Kit
- 800mm x High Tolerance PTFE
- Collet Clip
Questions
Would this be compatible with the Sovol SV03?
Will this work with the CR-10 v3?
What extra hardware is needed to fit the PT1000 thermistor in an Ender 3 V2?
What is needed to fit this on a Ender 5 Plus?
is it cr-10 compatible? if so do I have to buy other things to make it? can it reach 320C? cf polycarbonate is 315c
hello , will this work on a Tevo Nereus that has a stock MK8 Bowden 1.75mm 24v type setup? thank you !
I would like to use this to print ultra high temp materials. What upgrades would you recommend besides an upgraded thermistor (i.e. titanium heat break)? Could I order a hot end pre-assembled to reduce unwanted extra parts?
Is this compatible with the Hatchbox Alpha?
Compatible with Anycubic Mega? Thanks
Just wanted everyone to know that this is a drop in exact fit replacement hot end for the RailCore 300ZL. I ordered one from here and it works great, just like the original . And MatterHackers ships FAST. Don't waste your money on cheap imitations. Get a real E3D hot end!
Will this fit a creality CR-X model?
Greetings; What adaptor is needed to install in a chiron and where can it be obtained. Is there a hot end available for a Chiron to goes well above 300c and does the electronics and software in the Chiron support the increased temperature? Thank you and Merry Christmas John
Is the resistor a K-type? How many watts is the heater cartridge? Is 300c the absolute max temp this hot end can handle? Does it include the wiring to attach to the printer or does that need to be purchased separately?
Will this work with the ender 3 Bowden tube set up?
Hi Is this Chiron Compatible. Thanks
Tevo Nereus compatible? And what is max temp and time to heat up?
Are the fully assembled Hot ends tested?
Will this work with the tevo tornado
Is this ready for the RostockMAX v3.2?
Hello, Does this fit the Ender 3? Thank you!
MK3 Compatible?
Longer LK5 Pro 24V compatible?