Sorry, this product is currently unavailable
Alternative products you may be interested in:
Elegoo Elegoo Neptune 4 3D Printer
The Elegoo Neptune 4 and Elegoo Neptune 4 Pro 3D Printer offer a maximum print speed of up to 500mm/s with pre-installed Klipper firmware. These models also include a 121-point auto bed leveling system, gantry LED light strip, filament sensor, and more. The Neptune 4 Pro features an intelligent segmented heatbed and all-metal guide rails.
- Fast print speed up to 500mm/s
- Pre-installed Klipper firmware
- 121-Point Auto Bed Leveling
- Select Your Print Volume: from 225 x 225 x 265mm3 to 420 x 420 x 480mm3
List Price: | $250.00 |
---|---|
Availability: | Currently Unavailable |
ELEGOO NEPTUNE 4
EQUIPPED WITH KLIPPER
The Elegoo Neptune 4 series cranks up print speed and efficiency with pre-installed Klipper firmware on the 3D printer, allowing users to reach fast maximum print speeds of up to 500mm/s.
Key Features of the Elegoo Neptune 4 series of 3D Printers:
- Max Print Speed: Up to 500mm/h
- Recommended Print Speed: Up to 250mm/h
- Max Hotend Temperature: 300°C
- Pre-installed with Klipper firmware
- 121-Point Auto Bed Leveling
- Gantry LED light strip
- Overheat protection switch
- Neptune Pro features the following:
- Intelligent segmented heatbed
- All-metal guide rails
- Three Options of Print Volume:
- Neptune 4 and Neptune 4 Pro: 225×225×265mm3 (8.8×8.8×10.4in3)
- Neptune 4 Plus: 320 x 320 x 385mm (12.6 x 12.6 x 3.4in3)
- Neptune Max 420mm x 420mm x 480mm3 (16.5×16.5×18.9in3)
The Elegoo Neptune 4 3D printer series, featuring a Klipper motherboard and ARM 64-bit processor, offers lightning-fast printing speeds up to 500mm/s and improved print quality via input shaping and pressure advance.
- Klipper firmware pre-installed
- Max Print Speed: 500mm/s
- Recommended: 250mm/s
- Supports input shaping and pressure advance
UPGRADED EXTRUSION SETUP
Both the Elegoo Neptune 4 and Neptune 4 Pro maintain excellent print quality and heat dissipitation, and smooth filament extrusion for a variety of materials, even at high speeds, by utilizing a lightweight dual-gear direct extruder, extended hotend, and multiple cooling fans.
- Lightweight Direct Drive Extruder
- Max Hotend Temp: 300°C
- Rapid omnidirectional cooling via:
- Side: 2 x 4015 fans
- Back: 4 x 4020 fans
SMART SEGMENTED HEATED BED
The Elegoo Neptune 4 Pro offers an efficient and safe printing experience with a segmented heated bed that has overheat protection and customizable temperature control for different model sizes.
- Smart segmented heated bed adds efficiency and saves energy
- Overheat protection switch reduces chances of heated bed damage or fire
- Customize heated bed settings based on model size
- 100W bed for models < 120x120mm2
- 250W bed for models >120x120mm2
QUIET, STABLE PRECISION
Experience quiet and precise 3D printing on the Elegoo Neptune 4 and Neptune 4 Pro with its silent drivers, smooth POM V-guide wheels, and a dual lead screw design for enhanced accuracy and stability.
- Frame: CNC-machine Aluminum
- Operation Noise: Below 50db
- Z-Axis: Dual lead screw + dual motor
- Neptune 4 Pro: All-metal guide rails
ENJOYABLE PRINTING EXPERIENCE
Printing is a pleasant experience with the Elegoo Neptune 4 series which offers a variety of practical features that add convenience and efficiency to your workflow.
- Power Loss Recovery
- Filament Sensor
- Gantry LED light strip
- Removable touchscreen
- Magnetic Bed
What are the Differences Between the Elegoo Neptune 4 series?
Model | Neptune 4 | Neptune 4 Pro | Neptune 4 Plus | Neptune 4 Max |
---|---|---|---|---|
Price | $259 | $279 | $350 | $470 |
Print Volume (L × W × H) |
225 × 225 × 265mm3 (8.85 × 8.85 × 10.43in3) |
225 × 225 × 265mm3 (8.85 × 8.85 × 10.43in3) |
320 × 320 × 385mm3 (12.6 × 12.6 × 15.16in3) |
420 × 420 × 480mm3 (16.54 × 16.54 × 18.9in3) |
Intelligent Segmented Heatbed | ✘ | ✔ | ✘ | ✘ |
Overheat Protection Switch | ✘ | ✔ | ✔ | ✔ |
All-Metal Guide Rails | ✘ | ✔ | ✘ | ✘ |
What are the Technical Specifications of the Elegoo Neptune 4 and Neptune 4 Pro 3D Printer?
Neptune 4 | Neptune 4 Pro | Neptune 4 Plus | Neptune 4 Max | |
---|---|---|---|---|
GENERAL | ||||
Technology | FDM | FDM | FDM | FDM |
Assembly | Fully-Assembled | Fully-Assembled | Fully-Assembled | Fully-Assembled |
Machine Volume (L × W × H) |
475 × 445 × 515mm3 (18.7 × 17.5 × 20.3in3) |
475 × 445 × 515mm3 (18.7 × 17.5 × 20.3in3) |
533 × 517 × 638mm3 (21 × 20.4 × 25.1in3) |
658 × 632 × 740mm3 (25.9 × 24.9 × 29.1in3) |
Made in | China | China | China | China |
PRINTING PARAMETERS | ||||
Print Volume (L × W × H) |
225 × 225 × 265mm3 (8.85 × 8.85 × 10.43in3) |
225 × 225 × 265mm3 (8.85 × 8.85 × 10.43in3) |
320 × 320 × 385mm3 (12.6 × 12.6 × 15.16in3) |
420 × 420 × 480mm3 (16.54 × 16.54 × 18.9in3) |
Filament Diameter | 1.75mm | 1.75mm | 1.75mm | 1.75mm |
Nozzle Diameter | 0.4mm | 0.4mm | 0.4mm | 0.4mm |
# of Extrusions | Single | Single | Single | Single |
Extruder | Dual Gear Direct Drive | Dual Gear Direct Drive | Dual Gear Direct Drive | Dual Gear Direct Drive |
Max Nozzle Temperature | 300°C | 300°C | 300°C | 300°C |
Max Bed Temperature | 110°C | 110°C | 110°C | 110°C |
Max Print Speed | 500mm/s | 500mm/s | 500mm/s | 500mm/s |
Recommended Print Speed | 250mm/s | 250mm/s | 250mm/s | 250mm/s |
Min Print Speed | 30mm/s | 30mm/s | 30mm/s | 30mm/s |
ADDITIONAL FEATURES | ||||
Frame | CNC-machine Aluminum | CNC-machine Aluminum | CNC-machine Aluminum | CNC-machine Aluminum |
All-Metal Guide Rails | ✘ | ✔ | ✘ | ✘ |
Overheat Protection Switch | ✘ | ✔ | ✔ | ✔ |
Intelligent Segmented Heated Bed | ✘ | ✔ | ✘ | ✘ |
Build Surface | PEI (textured) Plate | PEI (textured) Plate | PEI (textured) Plate | PEI (textured) Plate |
Magnetic Bed | ✔ | ✔ | ✔ | ✔ |
Auto Bed Leveling | ✔ | ✔ | ✔ | ✔ |
Auxiliary (Manual) Leveling | ✔ | ✔ | ✔ | ✔ |
Pre-installed Klipper | ✔ | ✔ | ✔ | ✔ |
Filament Sensor | ✔ | ✔ | ✔ | ✔ |
Power Loss Recovery | ✔ | ✔ | ✔ | ✔ |
Gantry LED Light Strip | ✔ | ✔ | ✔ | ✔ |
Nozzle LED Light | ✔ | ✔ | ✔ | ✔ |
Removable Touch Screen | ✔ | ✔ | ✔ | ✔ |
COMMUNICATION | ||||
Display | 4.3" Touch Screen | 4.3" Touch Screen | 4.3" Touch Screen | 4.3" Touch Screen |
UI Language | English, French, German, Russian, Italian, Spanish, Japanese, Chinese |
English, French, German, Russian, Italian, Spanish, Japanese, Chinese |
English, French, German, Russian, Italian, Spanish, Japanese, Chinese |
English, French, German, Russian, Italian, Spanish, Japanese, Chinese |
Connectivity | USB, WLAN | USB, WLAN | USB, WLAN | USB, WLAN |
File Transfer | TF Card, Online Printing | TF Card, Online Printing | TF Card, Online Printing | TF Card, Online Printing |
SOFTWARE | ||||
Compatible Slicers | Creality Slicer, Cura, Repetier-Host, Simplify3D |
Creality Slicer, Cura, Repetier-Host, Simplify3D |
Creality Slicer, Cura, Repetier-Host, Simplify3D |
Creality Slicer, Cura, Repetier-Host, Simplify3D |
Supported File Format(s) | STL, OBJ, AMF | STL, OBJ, AMF | STL, OBJ, AMF | STL, OBJ, AMF |
POWER | ||||
Input | 100 - 240V 50/60Hz | 100 - 240V 50/60Hz | 100 - 240V 50/60Hz | 100 - 240V 50/60Hz |
WARRANTY | ||||
Warranty Period | 1 Year | 1 Year | 1 Year | 1 Year |
Questions
Is Pro Series Ryno safe for food storage?
Other than print temperature, I can't find information about print settings and recommended bed. Has anyone determined ideal fan settings, speed, bed type, etc? I could do some trial and error, but if anyone has already gone through this I would appreciate the guidance. I have done some test prints and am impressed it so far.
Is RYNO do you have do dry it?
Hello, What are the differences between Ryno and PETG? Thanks
How does Ryno compare to PCTG (not PETG).
Will Ryno withstand an underwater application?
I would like to bond multiple parts together with Polyester Resin. Has to be polyester or vinyl ester. Is this the best filament to do this with? Would the bond line be just as strong as the rest of the part?
What is the max sustainable temp printed parts can handle?
Debating on going with this or NylonX for an upcoming job, the item needs to be shown as presentable and almost like a nearly finished item. Would this or the NylonX be better for printing a presentation/functional item and how often would they need to be dried? I'd be running 3 different printers with the chosen material.
Does it require a specific nozzle and build plate.
Is PVA a good support material for Ryno? If not, what would you suggest?
How does this compare with Tough PLA?
In your current ads for filament, you show a device sitting on top of the reel of plastic. What is it?
How clear does it print? I have found most clear material with better clarity than translucent material but still quite translucent.
How well does this material stand up to outdoor use, especially in high summer temps? We get up to 115*F. I am making garden widgets and need them to maintain integrity and not crack-up with UV exposure. I know ASA is great for this, but I want something I can print on blue tape with an open frame printer. (I do have a heated bed)
I'm wondering the same thing about prolonged outdoor exposure.
(UV resistance, if any, and heat durability)