Fillamentum E3D Ceramic Heater Cartridge 24v 30w
Fillamentum CPE 3D printing filament is an inspired choice for 3D printing functional prototypes and mechanical parts, thanks to its chemical resistance, high impact strength, and jaw-dropping color selection. CPE has been chemically designed to reliably maintain dimensional stability, making it an adaptable and versatile 3D printing filament. And with the gorgeous and eye-catching colors you've come to expect from the Fillamentum line, Fillamentum CPE is perfect for use in a wide range of different applications.
| Availability: | Currently Unavailable |
|---|
Technical Specifications
- Filament Diameter: 1.75mm or 2.85mm +/- 0.05mm
- Extrusion Temp: 255 - 275 °C
- Bed Temp: 70 - 85 °C
- Weight: 750g (230g spool)
At MatterHackers, to bring you new and exciting products, we occasionally shift some of our quality stock to the Clearance section.
Reasons for Clearance Items:- New Product Versions: When manufacturers release updated versions of printers, CNC machines, filament, etc., the older versions typically go to Clearance.
- Overstock: Items we have in excess are moved to Clearance to free up warehouse space.
- Discontinuation: Discontinued product lines often end up in Clearance to expedite the sale of remaining stock.
- Packaging Changes: When packaging updates occur, we shift the older packaged items to Clearance.
- Poor Quality: Clearance items meet our rigorous quality standards and often brand new, unopened products.
- Limited Support: You'll receive our excellent customer service for Clearance items. Note, all Clearance purchases are Final Sale and not covered by the MatterHackers Return Policy.
Note, all Clearance purchases are Final Sale and not covered by the MatterHackers Return Policy.
Questions
Hello, Is the heater catridge isolated? I mean, can we connect it on the 1kV part? Thank you in advance.
Will this heater cartridge work on the micro swiss hot end. I am replacing the current micro swiss hot end with a new one and will need the heater cartridge wire as well. Since the old hot end has a stripped allen screw and I cant remove the cartridge
Is it the best HEATER CARTRIDGE for a Prusa MK3s ?
Will this work on the Prusa Mini?
Under the yellow connector the italicized specs states "24v 30v" this should be "24V 30W" as per your specs below.
Does this come with the connector? If not, do you sell it?
What is the gauge (awg) of these wires?
Can you recommend what model/color I need for CR-10 mini heater / thermistor cartridge? Im not sure what to get it may not be compatible.
I have a stock cr-10s pro. I assume its V1 as it does not come with the BLTouch. What cartridge will work? I want to upgrade the stock heat cartridge.
My 30w 12v e3d Heater cartridge only makes it to about 245c when set to 285c, then will eventually activate thermal protection. Is this normal for a 30w? Do I need a 40?? (Hemera install) 450w MW power supply to 13.5v.
OK so I have this connected to my hotend but how do I connect it to the power source? where or what do I do with the end not attached to the hotend to make it work?
8bit Pulse xe take 30 or 40 what
What voltage is the Pulse XE Nylon?
Do the wires have any polarity to them? I'm about to install/solder the pins, but I'm unsure if there is a +/- to them. I have a Tevo Tornado printer, I can see it's pins 1 and 2 for the yellow heater wires, but unsure if it matters which goes where.
Is the 24v 30w a good replacement for the Ender 3 V2 stock heater cartridge. If so is there enough length in the cable to reach the board?