Formlabs Formlabs Form 4 Series Resin Pump
Upgrade your Form 3 or 4 series 3D printers with the Formlabs Resin Pump, designed for efficient, high-volume printing. This system automatically dispenses 5L of resin directly to your printer when needed, reducing refill frequency, minimizing waste by 86%, and allowing savings on bulk resin purchases. Compatible with Form 3 and 4 series models, it ensures a steady resin flow for longer, uninterrupted printing, enhancing production scalability.
- Increases throughput, reduces refill frequency
- Saves on resin costs, minimizes waste
- Compatible with Form 3 or 4 series printers
Select the printer compatibility below.
| Price: | $25.00 (with add-ons) |
|---|---|
| Availability: | In Stock |
| Order Now: | Ships Today |
Resin Pump
PUMP UP THE VOLUME
Increase your Form 3 and 4 series 3D printers' throughput with the Formlabs Resin Pump. Seamlessly deliver 5L of resin through a pumping system directly to the machine’s resin tank. Reduce cartridge waste, improve efficiency with less frequent refill changes, and save big bulking up on Formlabs SLA resin purchases.
Key Features of the Formlabs Resin Pump:
- Maintain high uptime with steady resin flow
- Save big with bulk resin pricing
- Minimize frequent number of refills
- Reduce cartridge waste by 86%
- Select the correct variation at checkout:
HARDWARE THAT SCALES WITH YOUR PRODUCTION
When resin input can't catch up with your production output, it's time to upgrade to the Formlabs Resin Pump. Compatible with Formlabs' 5L container of photopolymer materials, the Resin Pump system is designed to reliably deliver plenty of resin to your Form 3 or 4 Series 3D printer during high-volume and large-part production runs.
- Print 5x longer
- Minimize printer interactions
- Feel confident knowing your print jobs will receive a reliable flow of material
PRINT SMARTER NOT HARDER
Increasing your production output requires no tedious effort when using the Resin Pump with the Formlabs Form 3 or Form 4. Go from replacing the resin cartridge from every 1L to every 5L while still utilizing the beloved benefits of automatic resin dispensing and material recognition via a card included with every Formlabs 5L resin.
- Minimize refills
- Resin dispensing still automated
- Printer automatically registers 5L resin w/ included material card
REDUCE COST AND WASTE
Bulk materials come with bulk savings when buying in 5 Liters instead of 1. Not only is cost reduced per Liter, but you're also reducing waste for disposal and the number of times needed to swap cartridges.
- Unlock bulk pricing
- Reduce waste by 86%
- Less resin cartridge changes
WHICH 3D PRINTERS ARE COMPATIBLE WITH THE RESIN PUMP?
| Form 3 Series | Form 4 Series |
| ✔ Formlabs Form 3L / 3BL ✔ Formlabs Form 3+ / 3B+ ✔ Form 3 / Form 3B | ✔ Formlabs Form 4L / 4BL ✔ Formlabs Form 4 / 4B |
WHICH MATERIALS ARE COMPATIBLE WITH THE RESIN PUMP?
At this time, the following resin materials are available in the 5L container required to attach to the Resin Pump system:
- Draft
- Clear
- Tough 2000
- Model
- Grey
- Black
- Fast Model
- Precision Model
- White
The following are also compatible, but note MOQ is required:
- Tough 1500 Resin
- Durable Resin
- Flexible 80A
- BioMed Durable
What's Included with the Formlabs Resin Pump System?
| 1 | × | Resin Pump
|
HOW DOES THE RESIN PUMP SYSTEM WORK?
Watch the detailed video below or read the simplified steps below regarding an overview of the Resin Pump System process.
- Attach the transfer tube to a Formlabs 5L resin container.
- Attach the transfer tube to the resin pump cartridge.
- Insert the resin card (comes with every 5L resin container) into the resin pump cartridge.
- Remove drip cap below the resin pump cartridge.
- Insert it into the standard resin cartridge slot.
That's it!
FAQ
Are there other Formlabs materials compatible with the Resin Pump?
- Most materials compatible with the Form 3 Series 3D printer you are using will also be compatible with the Resin Pump. However, to utilize the maximum benefits of the Resin Pump, that material must be in a Formlabs 5L container and come with a resin card.
Can I custom order a 5L container of Formlabs resin?
- Yes, you can request a quote to inquire about custom orders for 5L Formlabs resins.
- Custom resin orders will require at least a 30L minimum order quantity, if not higher for certain materials.
Will I need to perform maintenance on the Resin Pump?
- To ensure peak efficiency on your Formlabs Resin Pump, you must replace the transfer and internal tubes every 6 months (or when you switch between different materials) with the Formlabs Resin Pump Maintenance Kit.
Questions
Can you print pla without glue on this surface?
Not a question: I just wanted to say that this garolite sheet is awesome. I've been printing on PEI exclusively pretty much ever since I got my printer 9 months ago. I recently started printing PETG and decided to see if there was any other build surface that would have the same amount of adhesion without taking a part of the surface with it when I removed the part. This stuff fits the bill perfectly. Just as good adhesion as PEI with an easier ability to remove the part with the plus that the bottom surface is shiny like glass rather than matte like PEI. Stick this onto the bottom of a flexplate and you'll never look back!
Hi what size do I need for my prusa mk3s?
Can an Ultimaker S7 Sheet be added? Or should the S5 details be updated to include the S7? Is it also compatible? Also, it states that glass is required for the thin sheet and not required for the thick sheet. I have a metal flex plate included with the S7, so which would be needed?
Nylon G sticks almost too well. Had to really really fight to get it off. Any suggestions on a release agent? Plain PVA glue?
Is is possible to GAROLITE BUILD SURFACE in a 410x410mm size? I have a RatRig 400 and would love to get one for it
Is there a worldwide shortage of G10 or something? Many of the ones I want have been out of stock for like a year
Most layerlock garolite surfaces are out of stock with an estimated restock date of January 1. Since it is may 2023, should we expect restocking to occur in January of 2024?
Will Prusas pinda probe still work with garolite applied?
There was an error with the Z access and the nozzle slightly dug into the printbed (Id say maybe .05mm into the bed or pressure on the bed) leaving a trace and a lighter shade/white residue almost on the bed and I fear may be permanent damage any suggestions on restoring/cleaning the bed? (Was printing with PLA Ex-205 Bed-75 )
Any reason why the thick buildplate is not available for the ultimaker s3?
How thick are the plates?
Why no buildplate compatible for the Ultimaker S3!? I hope its just out of stock, for now I'm buying the S5 and cutting it on the table saw.
Interested to get the ender 3 version....Does it come with the adhesive on one side? I am looking to just sit it on top of the magnetic part of a pei bed (so that I can switch between the two) so ideally it is without adhesive. also do you have uk stockists?
Can this be adhered to a Buildtak flexible sheet so it's easy to pop off the bed with the Buildtak system (or similar system)?
How do I remove the LayerLock Garolite Build Surface 9" x 10"?
How well does this keep its form? I mean does it warp easily? I bought gasoline just like this from ebay that was half inch thick and that thing worped in the middle like crazy once it got heated.
Can I order a sheet of 350mm x 350 mm (or slightly larger)?
I have a very large bed that is 500mm x 500mm (19.68in). Is there a custom or oversized version that I can by and cut to fit?
I need a sheet that is 16x16 in, are these sheets the same as the Halogen-Free Garolite G-10 or Multipurpose Flame-Retardant Garolite G-10/FR4 from McMaster-Carr?
The Ender 5 Pro uses a dual magnet build plate (both glass plate and build surface are magnets). Can this be adhered to the top of the flexible magnetic build surface?
Can I print Polycarbonate on this?
Can I print TPU straight to bed without any glue sticks?
Is there a size that is pre-made to fit the prusa i3 mk3s? If not, what is the recommendation for making one of these sheets fit on a prusa and work with their magnetic bed system?
So the email says the 9.25" x 9.25" is back in stock but the web page will not permit me to add it to the cat=rt. What gives?
How well does this work with ABS?
Can this be mounted to a spring steel plate that can be flexed for easy part removal?
I have a 12 x 12 magnetic build plate system. One plate is pei and another is build Tak. Do you sell 12 x 12 flexible steel that I can attach this to?
When applied to the glass, does this material work with Ultimaker S5 auto-leveling or do you have to switch to manual leveling? I intend to have two glass plates to switch between... one with PEI and one with this Garolite but I want to retain auto-leveling if possible, to avoid having to swap between different startup G-code sequences, etc. Thanks!
Can this material be machined? And if so what would you recommend it be coated with for extra protection
When replacing this sheet, can it be applied to another used sheet of garolite or should the previous be removed before placing the new one?
Hi, is this a MatterHacker original product or is it made by someone else? I'm based in the UK and would like to buy this but the international shipping is prohibitive, is there a UK (or EU) based reseller?
Can this be applied over PEI? I have an old Prusa Mk3 PEI spring steel sheet with smooth PEI that I would like to use but don't want to remove the PEI film if possible.
I have a similar build plate on one of my machines. I flipped the spring steel sheet over and attached the Garolite to the opposite side. Now I can use either surface to print on.