LulzBot Black PRO Series Ryno Filament - 2.85mm (10lb)
The LulzBot Galaxy Series Nozzle Kit - Meteor is designed for the Meteor 175 and 285 Tool Heads, featuring nozzle sizes from 0.3mm to 0.8mm for varied printing needs. This kit includes a secure latching case and a calibrated torque tool for easy nozzle changes, ensuring enhanced precision and versatility in 3D printing.
- Nozzle sizes from 0.3mm to 0.8mm enhance versatility.
- Includes calibrated torque tool for easy nozzle swapping.
- Nickel-plated brass nozzles ensure durability and precision.
| Price: | $220.00 (with add-ons) |
|---|---|
| Availability: | In Stock |
| Order Now: | Ships Tomorrow Free U.S. Shipping |
LulzBot Galaxy Series Nozzle Kit - Meteor
Enhance Your 3D Printing Experience with Precision and Versatility
Upgrade your Meteor 175 or 285 Tool Head with the LulzBot Galaxy Series Nozzle Kit - Meteor and unlock endless printing possibilities. With alternate nozzle sizes ranging from 0.3mm for intricate detailing to 0.8mm for rapid prototyping, this kit offers versatility like never before. Packaged in a secure, latching case for organized storage, each nozzle is safely locked in place. The kit also includes a specially calibrated torque tool for effortless and reliable nozzle swapping, ensuring a seamless printing experience every time.
Key Features of the LulzBot Galaxy Series Nozzle Kit - Meteor:
- Nozzle sizes ranging from 0.3mm to 0.8mm for diverse printing capabilities.
- Secure and organized latching case for safe storage.
- Specially calibrated torque tool for easy and reliable nozzle swapping.
- Compatible with Meteor 175 and 285 Tool Heads.
- Micro Swiss nickel-plated brass nozzles for durability and precision.
Questions
What are the dimensions of the 5lb spool? When I select the 10lb spool, the dimensions listed under the Technical Specs do not change. I want to make sure the 5lb spool fits in my filament dryer.
This is comment and not a question. I just made a set of 3 parts with RYNO for the first time. After 2 tries at getting the temps and speeds set correctly, I made 99.9% perfect prints of all 3 parts in pretty reasonable times on my AnkerMake M5. I was pretty stunned at the results. Really like the results with Pro Series RYNO. For anyone else that needs reference: Fan 100% with fan disabled for first 3 layers. Bed is standard AnkerMake PEI cleaned with alcohol before start of print. Nozzle temp: 245°C Bed temp: 65°C First layer speed: 50 Outer wall speed: 60 Inner wall speed: 80 Sparse speed: 60 Internal solid infill speed: 60 Top surface: 65 Gap infill: 50 Support: 65 Travel: 500 Filament was in dryer for 3-4 hours to get down to 22%RH and ran from dryer with RH between 18-22% during printing.