LulzBot LulzBot Nozzle Kit - Asteroid 285 - 2.4mm
The LulzBot Nozzle Kit - Asteroid 285 features a 2.4mm GammaMaster® nozzle for high-flow printing, validated material profiles for consistent quality, and includes a calibrated torque wrench for easy nozzle changes. Comes in an organized latching case.
- Massive 2.4mm high-flow nozzle.
- Includes calibrated torque wrench.
- Organized latching storage case.
| List Price: | $69.00 |
|---|---|
| Price: | $69.00 |
| Price: | $... |
| Availability: | In Stock |
| Order Now: | Processed Immediately Free U.S. Shipping |
LulzBot Nozzle Kit - Asteroid 285
Uncompromising High Flow
The LulzBot Nozzle Kit - Asteroid 285 offers a solution for high-flow printing needs, neatly packaged in an organized latching case for convenience. Featuring a substantial 2.4mm nozzle and validated material profiles, this kit ensures consistent and reliable performance. Each kit comes equipped with a specially calibrated torque tool, facilitating effortless and dependable nozzle swapping.
Key Features of the PRODUCT:
- Massive 2.4mm Slice Engineering GammaMaster® Nozzle
- Validated material profiles for consistent printing quality
- Organized latching case for easy storage and transport
- Includes a specially calibrated torque wrench for hassle-free nozzle swapping
- Ensures uncompromising high-flow printing experience
Questions
This material seems to have terrible warping through our e3d volcano extruder when printing at lowest temperatures and max fan, is this material especially sensitive to chamber temperature and/or humidity? Cheap amazon PLA's don't seem to have any of the same issues...
In addition to my previous question, what is the diameter of the reel?
Whats the print settings of PRO PLA vs normal PLA? 1. I see your suggested settings of 235°C (assuming nozzle, all layers); This seems high over other 'normal PLA', the Prusa PLA i just took off my machine ran good at 205-210. BUT i did notice your BUILD series PLA states [205±15°C]. So pro just needs to run hotter? 2. Suggested setting says "Print speed 15mm/s" - That seems VERY slow in comparison to Prusa generic PLA I was just running. Again, I checked your BUILD series PLA to compare... nothing is listed, can you provide some more finely tuned print settings? Problem; off the batt with a new 5lb spool this stuff is printing pretty accurately from what I can tell but is VERY stringy. I'm about to test some higher temps and will report back.
Am now using my 2# Robo3D Carbon PLA. My carbon fill nylon should be kept dry. How much must I desicate all my PLA filaments? Have lefdt PLA filaments out for some time with no apparent bad effects.
what are the dimensions on M4S8S7TT? Spool diameter, width, true shipping weight?
What is the spool thickness on these 10lb reels? Want to make sure the holder I make can fit these on it. Also, what is the hole diameter in the reel?
Does this shrink less than the standard PLA when cooling? I don't see any mention of this specifically?
What's the tare weight of the spool?