LulzBot LulzBot OctoGrab SideKick 747 Textured Magnetic Flex Sheet
The LulzBot OctoGrab™ Magnetic Flex Bed is a 3D printer upgrade that makes print removal easier and more convenient. It features high-temperature neodymium magnets embedded in a 1/8" thick 5052 aluminum plate that can hold up to 140C° and a spring steel sheet with a layer of polycarbonate film on the back and a smooth sheet of PEI on the top printing surface. The PEI sheet grips your prints with much greater strength yet releases them once the print is finished, ensuring fewer false starts in your parts.
- Easily removable bed
- Strong adhesion
- High-temperature magnets
| Price: | $45.00 (with add-ons) |
|---|---|
| Availability: | Only 1 left in stock. |
| Order Now: | Ships Monday Free U.S. Shipping |
The LulzBot OctoGrab™ Magnetic Flex Bed is a convenient upgrade for 3D printers. It comes with a replaceable spring steel sheet with a layer of polycarbonate film on the back and a smooth sheet of PEI on the top printing surface. It features high-temperature neodymium magnets embedded in the 1/8" thick 5052 aluminum plate, which can hold up to 140C° for extended durations without losing any magnetic field strength over time. The PEI sheets allow for strong adhesion and easy part removal, and the TPU handles on the OctoGrab™ spring steel print surface allow for easy removal of the print bed while still warm.
Questions
Would this be compatible with the Sovol SV03?
Will this work with the CR-10 v3?
What extra hardware is needed to fit the PT1000 thermistor in an Ender 3 V2?
What is needed to fit this on a Ender 5 Plus?
is it cr-10 compatible? if so do I have to buy other things to make it? can it reach 320C? cf polycarbonate is 315c
hello , will this work on a Tevo Nereus that has a stock MK8 Bowden 1.75mm 24v type setup? thank you !
I would like to use this to print ultra high temp materials. What upgrades would you recommend besides an upgraded thermistor (i.e. titanium heat break)? Could I order a hot end pre-assembled to reduce unwanted extra parts?
Is this compatible with the Hatchbox Alpha?
Compatible with Anycubic Mega? Thanks
Just wanted everyone to know that this is a drop in exact fit replacement hot end for the RailCore 300ZL. I ordered one from here and it works great, just like the original . And MatterHackers ships FAST. Don't waste your money on cheap imitations. Get a real E3D hot end!
Will this fit a creality CR-X model?
Greetings; What adaptor is needed to install in a chiron and where can it be obtained. Is there a hot end available for a Chiron to goes well above 300c and does the electronics and software in the Chiron support the increased temperature? Thank you and Merry Christmas John
Is the resistor a K-type? How many watts is the heater cartridge? Is 300c the absolute max temp this hot end can handle? Does it include the wiring to attach to the printer or does that need to be purchased separately?
Will this work with the ender 3 Bowden tube set up?
Hi Is this Chiron Compatible. Thanks
Tevo Nereus compatible? And what is max temp and time to heat up?
Are the fully assembled Hot ends tested?
Will this work with the tevo tornado
Is this ready for the RostockMAX v3.2?
Hello, Does this fit the Ender 3? Thank you!
MK3 Compatible?
Longer LK5 Pro 24V compatible?