Magigoo Magigoo 3D Printer Bed Adhesion Solution - 50ml
Magigoo is an easy-to-use 3D printing adhesive designed to ensure excellent bed adhesion across a wide range of 3D printing materials. It keeps prints firmly attached to heated beds while allowing for easy removal once cooled. By preventing warping and improving first-layer success, Magigoo is ideal for both hobbyists and advanced users seeking consistent, high-quality results.
- Compatible with ABS, PLA, PETG, HIPS, ASA, and TPU
- Easy, tool-free part removal once cooled
- Reduces warping and improves print success rates
| List Price: | $21.00 |
|---|---|
| Price: | $16.80 |
| Price: | $... |
| Order Now: | Ships calculating... |
Magigoo 3D Printer Bed Adhesion Solution
Designed for flawless adhesion and easy print release
Magigoo is a convenient, no-mess solution designed to address common 3D printing challenges: poor bed adhesion, prints sticking to the bed, and warped first layers. This product ensures reliable adhesion for a wide range of materials while remaining safe and environmentally friendly. It is odorless and can be easily cleaned with water or a damp cloth, eliminating the need for tools such as spatulas. A single 50 ml tube provides sufficient coverage for over 100 prints, offering both efficiency and consistent performance.
Key Features of Magigoo 3D Printer Bed Adhesion Solution:
- Strong adhesion for ABS, PLA, PETG, HIPS, ASA, and TPU
- Tool-free removal after cooling
- Thin application ensures consistent performance
Safe, Versatile, and Reliable
Magigoo 3D Printer Bed Adhesion Solution is a non-toxic, odorless adhesive that delivers reliable bed adhesion on a wide range of surfaces. Its long-lasting formula is easy to clean, making it an ideal choice for professional 3D printing.
- Non-toxic and odorless
- Over 100 applications from a 50 ml tube
- Cleans easily with water or a damp cloth
- Works on glass and plastic-based surfaces for maximum adhesion
How to Use
- Shake well before use.
- Apply the adhesive by pressing the bottle tip against the clean printing surface to activate the valve, then spread evenly as needed.
- Print following the filament's recommended material settings.
- Remove the finished print once the bed has cooled.
- Clean the bed after printing with a sponge and water, then wipe with a damp cloth.
TIPS:
- Always apply to a clean printing surface for optimal adhesion.
- If a print sticks too firmly, apply a small amount of water to help dissolve the adhesive for easy removal.
- For filaments prone to warping, allow the first layer to dry and apply an additional coat if needed.
- Start at lower recommended bed temperatures and adjust in 5 °C increments to find the ideal setting.
