Thought3D Magigoo Supergrip 3D Bed Adhesion Solution for Flex Plates - 50ml
Magigoo Supergrip is designed for flexible build plates such as PEI, PC, and satin sheets while supporting materials including PLA, PET-G, ABS/ASA, and TPU. It provides over 250 full-bed (235×235mm) applications per bottle with a water-based formula that simplifies cleanup and print removal.
- Boost adhesion on flexible polymer surfaces
- Extend usage with 250+ print applications
- Simplify cleanup with water-based formula
| List Price: | $24.50 |
|---|---|
| Price: | $14.79 |
| Price: | $... |
| Availability: | In Stock |
| Order Now: | Ships Tomorrow |
Magigoo Supergrip 3D Printing Adhesive
Optimized Adhesion for Flexible Build Plates and a Wide Range of Materials
Magigoo Supergrip is a high-performance adhesive designed specifically for flexible build plates and polymeric surfaces. Compatible with popular materials like PLA, PET-G, ABS/ASA, and TPU, it ensures reliable first-layer adhesion and effortless print removal. Its water-based formula allows for easy cleanup, while its durability supports over 250 full-bed applications per bottle. This adhesive not only improves print consistency but also helps protect your build surface from wear. Whether you’re printing at high or low temperatures, Magigoo Supergrip delivers strong, dependable adhesion every time.
Key Features of the Magigoo Supergrip:
- Designed for optimal performance on flexible and polymer-based build plates, including PEI, PC, and satin sheets
- Supports a wide range of materials including PLA, PET-G, ABS/ASA, and TPU
- Extended usage life with over 250 full-bed applications per 235×235mm surface
- Superior adhesion strength across a wider temperature range, including enhanced performance with PLA and ASA
- Easy water-based cleaning and effortless part removal after cooling
Instructions for Use
Follow these simple steps to get the best results with Magigoo Supergrip:
-
Shake the Bottle – Shake well for 3–5 seconds before each use to ensure proper mixing.
-
Apply to Build Plate – Unscrew the cap and press the applicator tip against the build surface. Magigoo should flow freely; gently squeeze the bottle if needed while keeping the tip in contact with the plate.
-
Spread Evenly – Apply a thin, even layer of adhesive over the desired print area.
-
Start Printing – Begin your print immediately. The adhesive will dry as the bed heats—no need to wait for it to dry beforehand.
-
Remove the Print – After printing, flex the build plate to release the print. If it resists, let it cool for a few minutes before trying again.
-
Clean and Reapply – For optimal performance, wipe the build plate with a damp cloth to remove residue, allow it to dry, and reapply Magigoo before your next print.