MatterHackers Black PRO Series Ryno Filament - 2.85mm (10lb)
MH Build PLA is an affordable PLA filament intended for producing quality, 3D printed parts. MH Build PLA comes in a wide selection of bold colors to choose from. MH Build PLA is made with price in mind for any maker, from beginner to advanced, in a wide selection of bold colors. Save on purchasing cases of MH Build PLA!
| Price: | $220.00 (with add-ons) |
|---|---|
| Availability: | In Stock |
| Order Now: | Ships Tomorrow Free U.S. Shipping |
MH Build : Bulk Buy for the Best Price!
If you would like to order more or mix colors of MH Build cases please reach out to sales@matterhackers.com.
MH Build Series - Affordable PLA 3D Printer Filament for Every Maker
MH Build 3D printing filaments are designed with price in mind; we have taken the best aspects of PLA filament - it is renewable, biodegradable, and adaptable - and created an affordable solution for every 3D maker. MH Build filaments include PLA, ABS, and PETG. So if you’re a pure beginner with a limited budget, or an additive manufacturer looking to save on production costs, MatterHackers MH Build PLA is the filament to get any job done.
PLA, aka Polylactic Acid, is a multipurpose material commonly used in 3D printing. PLA filament is a bioplastic, which means it is made from renewable natural resources such as corn starch and tapioca products. As a biodegradable material, it is much better for the environment, especially compared to petrochemical-based alternatives. All MH Build filament is sealed with desiccant for storage and freshness.
Spool Specifications
- Recommended Extrusion Temperatures: 205±15°C
- Recommended Bed Temperature: Not needed, but if printer has heated bed, 40±15 °C
- Spool Dimensions (Approx.): 200mm Total Diameter x 50mm Inner Hole Diameter x 65mm Height
- 1 kg spool
- True Diameter: 1.75mm / 2.85mm
- Dimensional Accuracy: ±0.03mm
- Density: 1.25 g/cm³
- Volume: 0.80 L
- Length: 1.75mm - 332.60 m, 2.85m - 126.42m
- Download the Technical Data Sheet
- Download the Safety Data Sheet
Learn More About 3D Printing With PLA Filament
Your success in 3D printing is our goal, so we have created many guides to help you create the highest quality 3D printed parts possible.
- How to succeed when printing with PLA
- How to smooth and finish your PLA prints - Part 1
- How to smooth and finish your PLA prints - Part 2
Questions
What are the dimensions of the 5lb spool? When I select the 10lb spool, the dimensions listed under the Technical Specs do not change. I want to make sure the 5lb spool fits in my filament dryer.
This is comment and not a question. I just made a set of 3 parts with RYNO for the first time. After 2 tries at getting the temps and speeds set correctly, I made 99.9% perfect prints of all 3 parts in pretty reasonable times on my AnkerMake M5. I was pretty stunned at the results. Really like the results with Pro Series RYNO. For anyone else that needs reference: Fan 100% with fan disabled for first 3 layers. Bed is standard AnkerMake PEI cleaned with alcohol before start of print. Nozzle temp: 245°C Bed temp: 65°C First layer speed: 50 Outer wall speed: 60 Inner wall speed: 80 Sparse speed: 60 Internal solid infill speed: 60 Top surface: 65 Gap infill: 50 Support: 65 Travel: 500 Filament was in dryer for 3-4 hours to get down to 22%RH and ran from dryer with RH between 18-22% during printing.