Micro Swiss Bambu Lab A1 Mini 3D Printer
The Micro Swiss NG Direct Drive Extruder is a lightweight, 3:1 gear ratio extruder that is adaptable to a wide range of 3D printers. It features a hardened steel, precision-cut Dual Gear drive, and an industry shortest, highly constrained, TwinClad XT™ plated filament path. The extruder also has a bevel gear system that allows for a low overhang extruder mount, and is integrated with a Micro Swiss All Metal Hotend.
- Lightweight
- Adaptable to a wide range of 3D Printers
- Hardened steel, precision-cut Dual Gear drive
| Price: | $299.00 (with add-ons) |
|---|---|
| Availability: | In Stock |
| Order Now: | Ships Today Free U.S. Shipping |
Micro Swiss NG Direct Drive Extruder Features:
- Lightweight
- 3:1 Gear ratio
- Adaptable to a wide range of 3D Printers
- Hardened steel, precision-cut Dual Gear drive
- Industry shortest, highly constrained, TwinClad XT™ plated filament path
- Bevel Gear system allows a low overhang extruder mount
- Integrated with a Micro Swiss All Metal Hotend
The shortest filament path
You've set up your Creality, now it's time to take it to the next level! The Micro Swiss NG Direct Drive Extruder for your Creality3D printer overcomes the shortcomings of all current counterparts on the market, to create an optimal printing experience for everyone. Currently the industry's shortest filament path (less than 41mm). The unique motor placement allows for a highly compact, low overhang design. This further increases system rigidity.
Compatible with the following Creality3D printers:
- CR-10
- CR-10s
- CR-10-S5
- CR-10-S4
- Ender 3
- Ender 3 Pro
- Ender 3 V2
The product is not compatible with Gulfcoast Robotics mods*
What's included in the box?
- 1x Master Extruder Assembly
- 1x Adaptation plate
- 1x Stepper motor
- 1x Fan Shroud
- 1x Custom extension cable
- 1x Hotend assembly
- 1x Eccentric nut
- 1x M5 x .8 x 30mm CAP SCREW
- 1x 5mm ID 10mm OD Washer
- 1x M5 x .8 Nylon Lock Nut
- 2x M5 x .8 x 20mm Nylon Patch CAP SCREWs
- 4x M2.2 x 8mm Thread Forming Screw for Plastic
- 4x M3 x 12mm Thread Forming Screw for Plastic1x 7mm spanner wrench
Questions
If this was exposed to 105C for several hours, would it lose rigity?
Compatible dissolvable support material?
Can you print with this filament as easily as PLA on a stock ender 3 or Prusa 3D printers?
How hard is this to print with? Have an X1C and P1P from Bambu Lab so I am assuming this should be fairly simple to work with? Any specific settings that I should start with?
You will be fine.
I also have an X1C. I highly recommend making sure you've thoroughly cleaned the bed and used a glue stick. I've found slowing the overhang speeds down by 5-10mm/s PER SETTING is best practice on my machine for tricky overhangs I don't want to use supports on. Stock temps are awesome! Happy printing.