Photocentric 3D Photocentric 3D Ultrasonic Resin Wash Unit Bundle
The Photocentric 3D Ultrasonic resin wash unit is the solution to washing your 3D printed parts in a wide range of sizes. This unit offers temperature heating and ultrasonic power to clean out excess resin, regardless of complex designs. Photocentric 3D wash is capable of working with all resins and pairs flawlessly with Photocentric Resin Cleaner solution. Optimize your 3D resin post-processing experience with the Photocentric 3D ultrasonic wash unit. This bundle includes one Photocentric 3D Ultrasonic Resin Wash unit and two 5L Photocentric 3D Resin Cleaner. (bottles sized down to fit image)
| List Price: | $913.00 |
|---|---|
| Price: | $873.35 |
| Price: | $... |
| Availability: | Only 1 left in stock. |
| Order Now: | Ships Monday Free U.S. Shipping |
What's Included in the bundle
- Photocentric 3D Ultrasonic Wash Unit - 15L
- 2 Photocentric 3D Resin Cleaner Solution - 5L
STATE OF THE ART ULTRASONIC TECHNOLOGY CAPABLE OF CLEANING COMPLEX 3D PRINTS
The Photocentric wash unit is made with high-quality SUS stainless steel plates designed with lifelong use in mind. Featuring a temperature heating component and equipped with robust ultrasonic power to clean most prints in just 5 minutes. Photocentric wash unit is suitable to work with resins ranging from DLP, Laser, LCD, and daylight.
Quick-release system for easy drainage and no mess
Photocentric wash unit features an outflow valve and pipe making it efficient to pour used resin cleaner solution back into the bottle for easy disposal. You can get 140 prints cleaned per 15L of Photocentric Cleaner in regular use before changing. This no-mess solution can simplify your 3D printing post-processing experience.
Technical Specifications
External Dimensions: 11" (H) x 13.4" (D) x 13" (W)
Internal Dimensions: 4.7" (H) x 10.8" (D) x 11.8" (W)
Output frequency: 40khz
Agitation Method: 30 x 40khz transducers
Suggested operating environment: 64.4 - 82.4 F
Heating: 4500watt heating tube. Able to reach up to 80 degrees and maintain temperature
Suggested operating environment: 64.4 - 82.4 F
What's included in the box
- Lid
- Tank
- Basket
- Power cable
- Instruction manual
- Outflow valve
- Outflow pipe
- Clip
- Drain Plug
Questions
Not a question - I was totally bummed when i received this spool - while it was sealed there was air in the bag. however, it didnt matter. this stuff..... printed like rainbows and puppydogs. unbelievable! soooo nice.
Why does this merlot red PETG print horridly? 2nd item (a shoe horn) I've printed with it has gaps, stringing, blobs, in general a useless item. The first item (napkin rings) printed ok yet did wonder why the stinging when other PETG filament with same settings doesn't. Don't understand what's wrong with this "pro" series filament. Both items have previously printed fine.
I am looking for actual transluscent for a project I am working on which requires a red see thru plastic. I realize that 3D filament is not going to be glass clear, but the model you show does not look translucent at all. Is this translucent such as light can go thru it or is it just called translucent?
Is this (2.85mm Aqua PETG) still being produced? If so, when will it be in stock again?
I need to print a "red" translucent tail light lens on a Zortrax M200. Do you have a suggested material?
What is the weight comparison to regular PLA?
Would this filament be good for using as interior car parts especially in the deep south summer heat?
UV resistant?
The data sheet gives a flexural modulus of 935 KPSI. This seems very unrealistic. Is it a misprint?
Are the colorants used to make Matter Hackers filaments food safe and non-toxic?
PETG is great, but I haven't found a support material that works well. Suggestions would be welcome.