Phrozen Phrozen Cure Mega S

Maximize productivity with the Phrozen Cure Mega S. Its versatile settings, 360° turntable, and high-speed fans ensure even curing of any model size. With a built-in light and detachable rack, it's the ultimate tool for large-scale or batch curing.

  • Dries and cures large resin models
  • Max Cure Capacity: Within Ø350×300mm
  • Cure batches of prints with a detachable rack
List Price: $459.99
Price: $459.99
Price: $...
Availability: Only 1 left in stock.
Order Now: Ships Today MatterHackers Shipping Truck Free U.S. Shipping
This item cannot be shipped to a PO Box or APO/FPO/DPO address.
Qty
Add to wishlist
Product No. M-MDA-MUYP

PHROZEN CURE MEGA S

LARGE-SCALE DRY & CURING STATION

Experience unparalleled efficiency with the Phrozen Cure Mega S, designed for high-volume dry and cure production. Check out all the features below that make post-curing large or multiple models a breeze.

Key Features of the Phrozen Cure Mega S:

  • Cures large models within Ø350×300mm
  • Dry and cure separately or at the same time
  • 360° Turntable ensures an evenly cured model
  • Capable of batch curing with a detachable rack
  • Features interior light for curing visibility

POST-CURE EFFICIENTLY

Transform your post-curing production process with the Phrozen Cure Mega S. This high-productivity, large-scale curing station streamlines post-processing by condensing continuous drying and curing functions into one accessible machine. The 360° transparent turntable ensures even curing, while dual high-speed fans maximize drying power. With a built-in light for easy monitoring and a detachable rack for versatility, it's the perfect solution for curing large models or multiple smaller ones, meeting all your high-volume production needs.

Cure multiple models in the Phrozen Cure Mega S

Tips for Drying and Curing a Resin 3D Printed Model

  • When handling an uncured resin model, wear the following protective wear:
    • Goggles
    • Gloves
    • Long-sleeved clothing
  • Avoid direct contact with uncured resin and cleaning fluids to prevent allergies.
    • In case of contact with uncured resin and cleaning fluids, please rinse immediately with plenty of water.
  • Do NOT open the acrylic door while the machine is running.
  • Disconnect the power cable before performing maintenance on the machine.
  • Thoroughly clean and dry your resin 3D printed model before attempting to cure it.
    • If a model is not thoroughly cleaned or was cleaned in impured solution, this may cause white residue to form on your model during the curing process, which leads to uneven curing. There is generally minimal you can do to remove the white residue that doesn't lead to having to take an art knife to the print.
    • To avoid this, washing your prints in isopropyl alcohol or cleaning liquids is highly recommended (there is potential for white marks from tap water). Then make sure the print is thoroughly dry of liquid before curing.

What are the Technical Specifications of the Phrozen Mega Cure S?

GENERAL
Product Curing Station
Product Dimensions
(W × D × H)
395×375×486mm
(15.5"×14.7×19.1")
Weight 15kg (33lbs)
Made In China
CURING STATION PARAMETERS
Max Dry/Cure Capacity
(D × H)
Ø350×300mm
(13.7"×11.8")
Curing Time 1 - 120min (Recommended time: Maximum 30 minutes/cycle)
LED Specification 405nm
Fan RPM 1700 rotations/min
CURING STATION FEATURES
Interior Light Yes
Enclosed Yes
360° Turntable Yes; transparent
Detachable Rack Yes
POWER REQUIREMENT(S)
Max Power Consumption 70W
Input Voltage AC100-240V ; 50/60Hz

Questions View All Responses

Can this be applied over PEI? I have an old Prusa Mk3 PEI spring steel sheet with smooth PEI that I would like to use but don't want to remove the PEI film if possible.

View 1 Response

Can you print pla without glue on this surface?

View 1 Response

Not a question: I just wanted to say that this garolite sheet is awesome. I've been printing on PEI exclusively pretty much ever since I got my printer 9 months ago. I recently started printing PETG and decided to see if there was any other build surface that would have the same amount of adhesion without taking a part of the surface with it when I removed the part. This stuff fits the bill perfectly. Just as good adhesion as PEI with an easier ability to remove the part with the plus that the bottom surface is shiny like glass rather than matte like PEI. Stick this onto the bottom of a flexplate and you'll never look back!

Add Response

Hi what size do I need for my prusa mk3s?

View 1 Response

Can an Ultimaker S7 Sheet be added? Or should the S5 details be updated to include the S7? Is it also compatible? Also, it states that glass is required for the thin sheet and not required for the thick sheet. I have a metal flex plate included with the S7, so which would be needed?

Add Response

Nylon G sticks almost too well. Had to really really fight to get it off. Any suggestions on a release agent? Plain PVA glue?

Add Response

Is is possible to GAROLITE BUILD SURFACE in a 410x410mm size? I have a RatRig 400 and would love to get one for it

Add Response

Is there a worldwide shortage of G10 or something? Many of the ones I want have been out of stock for like a year

Add Response

Most layerlock garolite surfaces are out of stock with an estimated restock date of January 1. Since it is may 2023, should we expect restocking to occur in January of 2024?

View 1 Response

Will Prusas pinda probe still work with garolite applied?

Add Response

There was an error with the Z access and the nozzle slightly dug into the printbed (Id say maybe .05mm into the bed or pressure on the bed) leaving a trace and a lighter shade/white residue almost on the bed and I fear may be permanent damage any suggestions on restoring/cleaning the bed? (Was printing with PLA Ex-205 Bed-75 )

Add Response

Any reason why the thick buildplate is not available for the ultimaker s3?

View 1 Response

How thick are the plates?

View 1 Response

Why no buildplate compatible for the Ultimaker S3!? I hope its just out of stock, for now I'm buying the S5 and cutting it on the table saw.

View 1 Response

Interested to get the ender 3 version....Does it come with the adhesive on one side? I am looking to just sit it on top of the magnetic part of a pei bed (so that I can switch between the two) so ideally it is without adhesive. also do you have uk stockists?

View 1 Response

Can this be adhered to a Buildtak flexible sheet so it's easy to pop off the bed with the Buildtak system (or similar system)?

View 3 Responses

How do I remove the LayerLock Garolite Build Surface 9" x 10"?

Add Response

How well does this keep its form? I mean does it warp easily? I bought gasoline just like this from ebay that was half inch thick and that thing worped in the middle like crazy once it got heated.

View 2 Responses

Can I order a sheet of 350mm x 350 mm (or slightly larger)?

Add Response

I have a very large bed that is 500mm x 500mm (19.68in). Is there a custom or oversized version that I can by and cut to fit?

View 2 Responses

I need a sheet that is 16x16 in, are these sheets the same as the Halogen-Free Garolite G-10 or Multipurpose Flame-Retardant Garolite G-10/FR4 from McMaster-Carr?

View 1 Response

The Ender 5 Pro uses a dual magnet build plate (both glass plate and build surface are magnets). Can this be adhered to the top of the flexible magnetic build surface?

View 1 Response

Can I print Polycarbonate on this?

View 1 Response

Can I print TPU straight to bed without any glue sticks?

View 2 Responses

Is there a size that is pre-made to fit the prusa i3 mk3s? If not, what is the recommendation for making one of these sheets fit on a prusa and work with their magnetic bed system?

View 1 Response

So the email says the 9.25" x 9.25" is back in stock but the web page will not permit me to add it to the cat=rt. What gives?

View 1 Response

How well does this work with ABS?

View 1 Response

Can this be mounted to a spring steel plate that can be flexed for easy part removal?

View 1 Response

I have a 12 x 12 magnetic build plate system. One plate is pei and another is build Tak. Do you sell 12 x 12 flexible steel that I can attach this to?

View 1 Response

When applied to the glass, does this material work with Ultimaker S5 auto-leveling or do you have to switch to manual leveling? I intend to have two glass plates to switch between... one with PEI and one with this Garolite but I want to retain auto-leveling if possible, to avoid having to swap between different startup G-code sequences, etc. Thanks!

View 2 Responses

Can this material be machined? And if so what would you recommend it be coated with for extra protection

View 2 Responses

When replacing this sheet, can it be applied to another used sheet of garolite or should the previous be removed before placing the new one?

View 1 Response

Hi, is this a MatterHacker original product or is it made by someone else? I'm based in the UK and would like to buy this but the international shipping is prohibitive, is there a UK (or EU) based reseller?

View 1 Response
Load 1 more question

Ask a question about this product

Notify me when this item becomes available

Available Financing

Back to top