PolyMaker Red PRO Series PLA Filament - 2.85mm (10lb)
Take your prints further with Polymaker HT-PLA—an easy-to-use, eco-friendly filament that delivers pro-quality results and heat resistance up to 150°C. Print fast, choose from 14 vibrant colors, and enjoy reliable performance on any standard FDM printer—no tuning required.
- Extreme heat resistance
- Ultra fast prints
- Engineering grade
| Price: | $195.00 (with add-ons) |
|---|---|
| Availability: | Out of Stock Notify Me |
| Est. In Stock: Aug 22nd | |
Professional Heat-Resistant 3D Printing
Take your prints to the next level with Polymaker™ HT-PLA—engineered for creators who demand performance without the hassle.
- Extreme Heat Resistance: Designed to withstand temperatures up to 150°C, Polymaker HT-PLA keeps its shape even under extreme heat—no warping, no sagging, no compromises.
- Effortless Printing: Enjoy flawless results on most FDM 3D printers using standard PLA settings. No upgrades, no tuning—just pro-quality prints, every time.
- Ultra-Fast Prints: Achieve stunning results at speeds up to 300mm/s, so you can create more in less time.
- Eco-Friendly & Engineering-Grade: Get the reliability and sustainability of PLA with the heat stability of advanced materials. No post-processing required—just print and go.
TECHNICAL SPECIFICATIONS:
Printing Temperature: 210˚C - 230˚C
Bed Temperature: 25˚C - 60˚C
Printing Speed: up to 300mm/s
Fan: ON
Direct Drive:
Retraction Distance: 1-3mm
Retraction Speed: 20-40mm/s
Drying Settings: 60˚C for 6h (Only if the material has absorbed moisture)
For higher temperature stability, and HDT properties you can anneal this material for 30 minutes @ 80-100°C. ( 100°C Recommended )
Questions
This material seems to have terrible warping through our e3d volcano extruder when printing at lowest temperatures and max fan, is this material especially sensitive to chamber temperature and/or humidity? Cheap amazon PLA's don't seem to have any of the same issues...
In addition to my previous question, what is the diameter of the reel?
Whats the print settings of PRO PLA vs normal PLA? 1. I see your suggested settings of 235°C (assuming nozzle, all layers); This seems high over other 'normal PLA', the Prusa PLA i just took off my machine ran good at 205-210. BUT i did notice your BUILD series PLA states [205±15°C]. So pro just needs to run hotter? 2. Suggested setting says "Print speed 15mm/s" - That seems VERY slow in comparison to Prusa generic PLA I was just running. Again, I checked your BUILD series PLA to compare... nothing is listed, can you provide some more finely tuned print settings? Problem; off the batt with a new 5lb spool this stuff is printing pretty accurately from what I can tell but is VERY stringy. I'm about to test some higher temps and will report back.
Am now using my 2# Robo3D Carbon PLA. My carbon fill nylon should be kept dry. How much must I desicate all my PLA filaments? Have lefdt PLA filaments out for some time with no apparent bad effects.
what are the dimensions on M4S8S7TT? Spool diameter, width, true shipping weight?
What is the spool thickness on these 10lb reels? Want to make sure the holder I make can fit these on it. Also, what is the hole diameter in the reel?
Does this shrink less than the standard PLA when cooling? I don't see any mention of this specifically?
What's the tare weight of the spool?