PolyMaker PolyMaker PolyDissolve S1 Support Filament - 1.75mm (0.75kg)
PolyDissolve S1 by PolyMaker is a water-soluble support material for 3D printing designed specifically to work with a long list of essential 3D printing materials, such as PLA, TPU, PVB (Polyvinyl butyral), and Nylon. By using PolyDissolve S1, your 3D prints can have strange and complex architecture such as overhangs, thanks to being supported during the printing process. That support then dissolves away when submerged in water, leaving your amazing 3D print clean and ready for its application.
To learn about available discounts, training, and maintenance options, please use the form below and a MatterHackers Expert will contact you within one business day. Alternatively, you can always feel free to give us a call at +1 (800) 613-4290 or email sales@matterhackers.com.
To get an instant quote, add everything you need to your cart, and click "Download as quote".
Expand Your Printing Capabilities with PolyDissolve
3D printing support material is essential for some of the more complex designs to be properly printed. Because of the technical requirements of the FFF technology, thermoplastic can only be extruded on to solid material, whether the 3D printer's build plate or a previously extruded layer of the print. Any 3D printing material extruded into the air, called an overhang, will simply fall and ruin the print.
You can always design your 3D print to include all kinds of scaffolding, which supports those overhangs, but when the scaffolding is made of the same material, it can be difficult to cleanly remove it from the print, resulting in a somewhat rough underside on your otherwise gorgeous printed part.
All of this can be avoided by using dissolvable, or water-soluble, support material in your 3D printer's second extruder. You can achieve the same scaffolding structure for your overhangs, but once your print is complete, simply submerge the entire print in water for several hours (depending on the amount of support filament used), and the PolyDissolve S1 will be gone, dissolved into the water, and your 3D print will remain, ready for display or installation.
The before and after of a print that requires support material
PolyDissolve Is Engineered for an Exceptional Material Interface
The key to properly using support filament is the layer where support stops and the actual print begins. This interface layer is pivotal to making certain the support material actually holds up the overhang. PolyMaker designed PolyDissolve S1 specifically to ensure an excellent interface, no matter the supported material.
Printing temperature is another crucial element, as every material has an effective temperature range, and if your printing and support materials' print temps don't overlap, the interface layers simply won't adhere. To insure a good interface, and thus good support, make sure to print only with supported materials, and using a print temp that's good for both the material and the PolyDissolve.
Technical Specifications
- Nozzle Temperature: 215˚C – 225˚C
- Printing Speed: 20mm/s – 40mm/s
- Bed Temperature: 25˚C – 60˚C
- Bed Surface: Glass with glue or blue tape
- Cooling Fan: On
- 3D Printer Requirements: Dual Extrusion Required
- Drying Settings: 80˚C for 12h
- Download the PolyMaker PolyDissolve S1 SDS here.
- Download the PolyMaker PolyDissolve S1 TDS here.
Check out our article on using dissolvable support material.
