Protopasta Brown PRO Series ABS Filament - 1.75mm (1kg)

Protopasta HTPLA combines the ease of PLA 3D printing with the ability to heat-treat your parts post-printing to increase their stiffness at higher temperatures. It can be heat treated in an oven at 100-120C (200-250F) to increase stiffness and reduce warping with the best results seen on flat and/or supported parts with 100% infill.

  • Prints easily like PLA
  • No Hardened Nozzle
  • Easy Heat Treat Process
Price: $52.00 (with add-ons)
Availability: In Stock
Order Now:
Ships Tomorrow MatterHackers Shipping Truck Free U.S. Shipping - excludes Alaska and Hawaii
Qty
Add to wishlist
Product No. M-M27-84L3
Filament Diameter: 1.75mm
1.75mm
2.85mm

Heat Treat for Great Performance!

PLA and HTPLA are great for many applications, just exactly as they're printed! But once they're stored above 50C, they start to break down. Luckily, the HT is for Heat Treat! Or is it High Temp? Either way, it spells a huge improvement (up to three times) to the part's thermal stability!

Simply place your printed part in your oven for a few minutes (larger parts will need longer times) at 100 - 120C (200 - 250F), and the material will crystallize and become much stiffer. Keep in mind this may warp some architectures of printed parts, so experimentation is required. Best results are with flat and/or supported parts with 100% infill.

HTPLA could be the solution to your printing needs!

NO HARDENED NOZZLE REQUIRED

Many composite materials require a hardened nozzle, but not this filament! This material prints perfectly with a standard brass nozzle without any additional wear compared to standard filaments. This material is perfect for those who want to expand their filament library without having to make hardware changes on their printer, as it offers expanded possibilities without any drawbacks or complications.

Please note, all Clearance Item purchases are final and are not covered by the MatterHackers Return Policy - this excludes Refurbished 3D printers and machines which have at least a 6-month warranty.

Reason for Clearance:  2.85mm is being discontinued.

Why Are Items on Clearance?

At MatterHackers, to bring you new and exciting products, we occasionally shift some of our quality stock to the Clearance section.

Reasons for Clearance Items:
  • New Product Versions: When manufacturers release updated versions of printers, CNC machines, filament, etc., the older versions typically go to Clearance.
  • Overstock: Items we have in excess are moved to Clearance to free up warehouse space.
  • Discontinuation: Discontinued product lines often end up in Clearance to expedite the sale of remaining stock.
  • Packaging Changes: When packaging updates occur, we shift the older packaged items to Clearance.
Clearance Does NOT Imply:
  • Poor Quality: Clearance items meet our rigorous quality standards and often brand new, unopened products.
  • Limited Support: You'll receive our excellent customer service for Clearance items. Note, all Clearance purchases are Final Sale and not covered by the MatterHackers Return Policy.

Note, all Clearance purchases are Final Sale and not covered by the MatterHackers Return Policy.

Questions View All Responses

My build recommends esun pla+, or esun abs, I am looking for maximum shock/impact resistance, with maximum layer adhesion, not concerned with cost of filament, in other words not looking for the bargain filament on this build. My question is the pro series better than esun filament?

Add Response

What is the mechanical properties of this ABS like Elasticity Modulue and poissons ratio and density?

Add Response

What are dimensions of reel. Will it fit in the Ultimaker material handler?

View 1 Response

What would cause layer separation? Print temp 250 C Bed temp 90 C (max of my printer) Speed 60 mms Cooling ON

View 1 Response

What are the mixing proportions of the ABS?

Add Response

All I can add is that I'm testing my luck with a CR6Max. Here's the trick to adhesion... ---- I maxed out the OEM settings at 260/90 and run my 1st layer SLOW. As in 10 slow. ---- Only using glue on a glass bed and after the 1st layer adheres she's running. Benchy came out 9.5/10 first attempt, first ABS print ever.

Add Response

Is it food, microwave and dishwasher safe?

View 1 Response

Why is this filament so difficult to print with? I'm running a heated enclosure @ 45C, printing at 235C, with a heated bed of 110C. Printing small 1-2 inch parts on a level/clean bed with proper first layer leveling and I'm getting absolutely awful warping that ruins the prints. So far I can't see anything PRO about this filament.

View 2 Responses

Hey! I just wanted to see if you had any pictures comparing this (MH Pro Series Purple) compared to the Build Series Purple. The Pro looks a bit more matte and lighter in hue than the Build--something I've been looking for!

View 1 Response

Ask a question about this product

Back to top