Protopasta Protopasta Electrically Conductive Composite PLA Filament - 2.85mm (0.5kg)
Protopasta Conductive PLA is an easy-to-print filament with semi-flexible properties and low-voltage circuitry capabilities, making it a great choice for printing simple circuits and touch-sensitive devices. Try printing an LED, a touch sensor, or anything else that you can run through a 1K resistor. This filament can be used with any 3D printer since it is made of PLA which requires no heated bed and low print temperatures.
- Semi-flexible
- Low voltage circuitry
- Conductive PLA
To learn about available discounts, training, and maintenance options, please use the form below and a MatterHackers Expert will contact you within one business day. Alternatively, you can always feel free to give us a call at +1 (800) 613-4290 or email sales@matterhackers.com.
To get an instant quote, add everything you need to your cart, and click "Download as quote".
What is Conductive PLA?
Protopasta Conductive PLA is easy to print and can be used on any 3D printer that can handle PLA filament. This conductive filament is ideal for low voltage circuitry and can even power a low current Arduino. So how does this filament compare to regular PLA? Great question - this conductive PLA filament will print objects that are more flexible than normal PLA but have less layer adhesion. It can be characterized as semi-flexible and should be kept at temperatures below 50C. If you decide to use this material in a dual extruder, we recommend printing it with regular PLA since they stick well to one another.
HOW Conductive is it?
You might be asking yourself, just how conductive is this filament? Below please find the various measurements of conductivity as provided by Protopasta.
- Volume resistivity of molded resin (not 3D Printed): 15 ohm-cm
- Volume resistivity of 3D printed parts perpendicular to layers: 30 ohm-cm
- Volume resistivity of 3D printed parts through layers (along Z axis): 115 ohm-cm
- Resistance of a 10cm length of 1.75mm filament: 1.8Kohm
- Resistance of a 10cm length of 2.85mm filament: 600ohm
Density:
1.15 g/cm3 (1500 kg/m3)
Parameters:
Bed Temp (if available, is not required): 50° C
Hot End Temp: 215 – 230° C (we advise printing at the hotter end of the range)
