Raise3D Raise3D N2 Fully Enclosed DUAL Extruder 3D Printer

The Raise3D N2 Dual is one of the largest dual extrusion machines we carry but is nearly half the price of other printers with a similar build volume! The N2 has a massive 12" x 12" x 12" build area, is fully enclosed with an all-aluminum metal frame, and comes with a 7" full-color touchscreen built into the printer. The Raise N2 Dual comes stock with a heated bed and Dual Extruder hotend capable of reaching 300C, so your material and printing possibilities are endless!

List Price: $2,999.00
Availability: Currently Unavailable
Add to wishlist
Available Add-ons (2)
$19.99 $14.00 View Addon »
$19.99 $14.00 View Addon »
Show More Add-ons
Product No. M-7WM-J59J

Huge, Fully Enclosed Build Area

The Raise 3D N2 Dual has a huge build volume of 12" x 12" x 12", which is nearly unheard of at its price point. Additionally, the entire printer is fully enclosed with a sturdy aluminum metal frame and ABS, acrylic, and polycarbonate casing. The fully enclosed design not only improves print quality when printing with materials such as ABS, but also greatly enhances the safety of the printer, making the N2 Dual a great fit for schools and businesses.

7" Full Color Touchscreen

The Raise 3D N2 Dual has a number of great features, one of which is the 7" full color touchscreen built right into the printer. Calibrate your N2 Dual, monitor your print process, and edit your settings all at the touch of your fingertip. The touchscreen can access your print files via WiFi, LAN, USB or SD card.

Print recovery

The touchscreen is also integrated with the N2 Dual's print resuming feature, allowing you to immediately resume a print that was interrupted due to a power outage or accidental shut-off. No more frustration from having to start a print all over!

Endless Material Possibilities

The Raise 3D N2 Dual comes with a heated bed and the V2 Hot End capable of temperatures up to 300 C. This makes the N2 compatible with almost any material you can find, including our selection of PLAABSPETGNylonCarbon FiberTPU/TPE (Flexibles), Metal Composites (with the upgrade to a wear resistant nozzle), and more! For a full list, check out our Filament Comparison Guide.

Dual Extrusion

The Raise 3D N2 Dual comes stock with a dual extruder. With dual extrusion, your printing capabilities aren't just doubled, they're exponentially increased! Print with two different colors at the same time, or pair one material with a dissolvable support material like PVA and HIPS. With soluble support, you can print complex models with ease.

This abstract rabbit design is possible with dual extrusion!

Printer Specifications

  • Print Technology: FFF
  • Build Volume (WxDxH): 12x12x12 inch / 305x305x305 mm
  • Layer Resolution: 0.01~0.25 mm
  • Filament Type: PLAABSPETGNylonCarbon FiberTPU/TPE (Flexibles), Metal Composites, and more.
    • Note: This printer comes with brass nozzles, an upgrade to a wear resistant nozzle is required to print abrasive filaments.
  • Filament Size: 1.75mm
  • Printing Surface: Buildtak
  • Heated Build Platform: Yes
  • Enclosure: Yes
  • Nozzle Diameter: 0.4 mm (0.016 in)
  • Nozzle Working Temperature: 170-300 ℃
  • Number of Nozzles: 2
  • Printing Speed: 10 ~ 150 mm/s
  • Moving Speed: 150 ~ 300 mm/s
  • Positioning Accuracy: XY-axes: 0.0125 mm, Z-axis: 0.00125 mm

Shipping Notice

Please note that due to the size and packaging of this machine, your Raise3D N2 Dual will ship on a pallet via freight, which could extend delivery times. If you are shipping a Raise3D printer to a residential address, the freight company will call you to schedule a delivery. Shipments made to commercial addresses will be made without the need to schedule a delivery.

Questions View All Responses

Is there a warranty or support?

View 1 Response

I am looking to replaces the Ceramic Heater Cartridge, High Precision Heater Cartridge, heat sink, and the heater block, but I don't really know what is ok to use for this printer.

View 1 Response

Is this an open source or a close source

View 1 Response

What is an open source and close source computer software?

View 1 Response

What type of 3d printer is this? example: FDM, SLS, SLA?

View 1 Response

What comes with this printer if you order it?

View 2 Responses

how many print heads does this printer have?

View 1 Response

Hi What is the shipping time to South Africa for the Raise3D N2 Plus? If I send you a 3d model, would you be able to tell me how long it would take to print one model? We intend on using this printer for manufacturing and prototyping of our IoT cases. Regards Jaron

View 1 Response

Good day We're looking for a 3D printer to manufacture cases for our commercial devices. The reason we're going for a 3D printer right now is because we're going through a prototyping phase and the design will change fairly often in the coming months. An important factor in deciding on a 3D printer is the following: what does it cost to print one case and how long does it take. My question: if I send you an STL file, will you be able to tell me how long this printer will take to print it and the volume of material required? Best Jaron

Add Response

Can this printer use CNC or laser heads? Looking to find a printer that can (basically) do it all and on a large build plate such as this

View 1 Response

Is there a different lid that sits higher or has someone done something custom to make the lid taller? I've been having problems with the filiment feeding into the extruder when I have the cover on, it would be extremely helpful if the lid was a couple inches taller.

View 3 Responses

Is it a 12v or 24v system?

View 1 Response

Is there a filament detection system so the printer pauses of the filament runs out?

View 1 Response

What is the lifetime of the (a) buildtac plate? Are there other options? Is the plate removable?

View 1 Response

Is there any air filter inside this printer for safer running of ABS?

View 1 Response

Does this or any of your enclosed printers have a UL or CSA electrical certification?

View 1 Response

I do not see this printer in matterhackers software ?

View 1 Response

What is the regular maintenance on the printers?

View 2 Responses

Does the software and firmware support printing with a 0.25mm nozzle

View 1 Response

Can I print nylon without having to upgrade the extruder or nozzle.

View 1 Response

What file format is required for the printer.

View 1 Response

Does it use g-code programs or can you program it with Simplify or Cura?

View 3 Responses

Can this do hats,pants,shoes ?

View 1 Response

I am looking for a printer to print alumide and for the life of me I can't find it. Please help.

View 1 Response

Send info please on 12 x 12 3d printer

View 1 Response

How hard is it to instal hardend steel nozels on this printer myself?

View 1 Response

I have a raise n2 3d printer in my house my son just purchased one, I am afraid that it may catch fire and burn the house. Can this happen?

View 1 Response

Raise3D doesn't offer a steel nozzle, but we will be carrying their V2H Nozzles, which are "TwinClad XT" coated, making them wear-resistant. Availability is 2-3 weeks.

Add Response

Is a stainless steel nozzle available? The brass often contains lead.

Add Response

What is the print nozzle made of?

View 1 Response

Will this printer work with Hydrofill?

Add Response

What is the country of manufacture for the Raise3D line of printers?

View 2 Responses

Any plans to stock the N1?

View 1 Response
Load 11 more questions

Ask a question about this product

Notify me when this item becomes available

Available Financing

Back to top
Enter Your Zipcode

View availability and shipping options for this product.