Raise3D Black PRO Series PLA Filament - 2.85mm (10lb)
A drop-in replacement for the standard nozzles on Raise3D Pro3 Series, Pro2 Series, and E2 3D Printers. Raise3D Steel Nozzles with WS2 Coating are designed for use with composite or filaments with abrasive additives such as carbon fiber, ceramic, metal, and more. Capable of printing at temperatures of up to 450°C, these nozzles balance optimized melt flow with a high level of durability.
| Price: | $195.00 (with add-ons) |
|---|---|
| Availability: | In Stock |
| Order Now: | Ships Today Free U.S. Shipping |
RAISE3D STEEL NOZZLE WITH WS2 COATING
Raise3D Steel Nozzles with WS2 Coating is designed for use with composite or filaments with abrasive additives such as carbon fiber, ceramic, metal, and more. Capable of printing at temperatures of up to 450°C, these nozzles balance optimized melt flow with a high level of durability.
Here are the key features of the Raise3D Steel Nozzle with WS2 Coating:
- Low Friction coefficient with WS2 Coating for low material accumulation
- Good lubrication and anti-abrasive performance under high temperatures (up to 450°C)
- Optimized Flow Behavior for composite filament
- Mohs Hardness of 7.8
DIFFERENT SIZES FOR DIFFERENT PROJECTS
Raise3D Steel nozzles with WS2 coating are available in 3 different sizes.
- 0.4mm
- 0.6mm
- 0.8mm
TECHNICAL SPECIFICATIONS:
- Diameter: 1.75mm
- Compatability:
- Pro3 Series
- Pro2 Series
- E2
- Mohs Hardness: 7.8
- Printing Temp: 450°C
- Coefficient of heat conductivity: 26W/m.k
- CTE: 12 (μm/m)/ °C
- Packaging Size (WxDxH): 130x110x5mm
- Weight with Packaging: 9g
Questions
This material seems to have terrible warping through our e3d volcano extruder when printing at lowest temperatures and max fan, is this material especially sensitive to chamber temperature and/or humidity? Cheap amazon PLA's don't seem to have any of the same issues...
In addition to my previous question, what is the diameter of the reel?
Whats the print settings of PRO PLA vs normal PLA? 1. I see your suggested settings of 235°C (assuming nozzle, all layers); This seems high over other 'normal PLA', the Prusa PLA i just took off my machine ran good at 205-210. BUT i did notice your BUILD series PLA states [205±15°C]. So pro just needs to run hotter? 2. Suggested setting says "Print speed 15mm/s" - That seems VERY slow in comparison to Prusa generic PLA I was just running. Again, I checked your BUILD series PLA to compare... nothing is listed, can you provide some more finely tuned print settings? Problem; off the batt with a new 5lb spool this stuff is printing pretty accurately from what I can tell but is VERY stringy. I'm about to test some higher temps and will report back.
Am now using my 2# Robo3D Carbon PLA. My carbon fill nylon should be kept dry. How much must I desicate all my PLA filaments? Have lefdt PLA filaments out for some time with no apparent bad effects.
what are the dimensions on M4S8S7TT? Spool diameter, width, true shipping weight?
What is the spool thickness on these 10lb reels? Want to make sure the holder I make can fit these on it. Also, what is the hole diameter in the reel?
Does this shrink less than the standard PLA when cooling? I don't see any mention of this specifically?
What's the tare weight of the spool?