Shaper Origin Shaper Origin ShaperTape
ShaperTape is a specialized product designed to enhance the functionality of the Shaper Origin, a handheld CNC router. ShaperTape is printed with uniquely encoded patterns using specialized equipment, ensuring precise tracking and optimal tool performance. ShaperTape is essential for ensuring the Shaper Origin can perform precise operations by maintaining accurate position tracking on your workpiece.
Ket features of the ShaperTape include:
- Easy Application and Removal: The tape features carefully selected adhesives that make it easy to apply to various materials and remove without leaving any residue.
- Coverage: A single roll covers approximately one and a half standard 4' x 8' sheets of plywood, depending on the project's scale.
- Versatility: It allows the Shaper Origin to accurately locate itself on any workpiece, adhering well to a variety of materials.
| List Price: | $22.00 |
|---|---|
| Price: | $22.00 |
| Price: | $... |
| Availability: | In Stock |
| Order Now: | Ships Tomorrow |
Technical Specifications
- Total Roll Length: 150'
- Tape Width: 0.75"
Questions
This material seems to have terrible warping through our e3d volcano extruder when printing at lowest temperatures and max fan, is this material especially sensitive to chamber temperature and/or humidity? Cheap amazon PLA's don't seem to have any of the same issues...
In addition to my previous question, what is the diameter of the reel?
Whats the print settings of PRO PLA vs normal PLA? 1. I see your suggested settings of 235°C (assuming nozzle, all layers); This seems high over other 'normal PLA', the Prusa PLA i just took off my machine ran good at 205-210. BUT i did notice your BUILD series PLA states [205±15°C]. So pro just needs to run hotter? 2. Suggested setting says "Print speed 15mm/s" - That seems VERY slow in comparison to Prusa generic PLA I was just running. Again, I checked your BUILD series PLA to compare... nothing is listed, can you provide some more finely tuned print settings? Problem; off the batt with a new 5lb spool this stuff is printing pretty accurately from what I can tell but is VERY stringy. I'm about to test some higher temps and will report back.
Am now using my 2# Robo3D Carbon PLA. My carbon fill nylon should be kept dry. How much must I desicate all my PLA filaments? Have lefdt PLA filaments out for some time with no apparent bad effects.
what are the dimensions on M4S8S7TT? Spool diameter, width, true shipping weight?
What is the spool thickness on these 10lb reels? Want to make sure the holder I make can fit these on it. Also, what is the hole diameter in the reel?
Does this shrink less than the standard PLA when cooling? I don't see any mention of this specifically?
What's the tare weight of the spool?