Need a last minute gift?
MatterHackers' Gift Cards are Digitally Delivered Instantly.
Shop Now

Thought3D Thought3D Drywise Inline Filament Dryer 1.75mm

The Drywise Inline Filament Dryer is a user-friendly device that quickly and efficiently dries 3D printing filament - including hygroscopic materials like nylons - with no down time or pre-planning. It features intelligent smart sensors, a rechargeable desiccant cartridge, and comes in 1.75mm and 2.85mm versions. It is designed to save time, money, and effort, allowing users to focus on their designs.

  • Intelligent sensors for optimal drying.
  • Rechargeable desiccant cartridges.
  • User-friendly interface.
loading...
Product No. loading...

The Drywise Inline Filament Dryer

Save Money, Time, and Effort by drying your filament as your print

The Drywise Inline Filament Dryer delivers perfectly conditioned 3D printing filament – even very hygroscopic materials like nylons – almost instantly with virtually no down time and pre-planning needed. This means you get more time to focus on what really matters to you, designing and innovating

Here are the key features of the Drywise Inline Filament Dryer: 

  • Available in two versions - 1.75mm and 2.85mm
  • Inline design dries only the section of filament being printed
  • intelligent smart sensors for optimal drying settings
  • User-friendly interface
  • Smart Idle Detector
  • Rechargeable desiccant cartridges
  • A constantly growing list of certified compatible filament


Focus On What Matters

Drywise delivers perfectly conditioned 3D Printing filament — even very hygroscopic materials like nylons —almost instantly with virtually no down time or pre-planning needed. This means you get more time to focus on what really matters to you, such as designing and innovating

  • Technology: Fused Filament Fabrication filament pre-processing
  • Interface: 4.3" capacitive touch panel. Guiding LED lights
  • Filament Path: Guided input and output filament path
  • Filament Diameter: 2.85mm or 1.75mm depending on selection.
Dentist Interview

Thermoformed Braces

More Materials. More Possibilities

Drywise makes it easy to print with demanding technical plastics as it eliminates the guesswork from the drying process. With an ever-growing list of certified materials, just select the right material from the list and get printing, leaving the smart drying technology to take care of all the parameters.

  • The presence of moisture in filament can potentially cause print failure and affect the mechanical properties of the printed part.
  • Drywise ensures consistently dried filament and eliminates multiple drying cycles and material degradation.
  • View the database of latest tested materials here

Why Is Filament Drying Important?

Hygroscopic FDM filaments tend to absorb significant amounts of moisture from the environment. Over the course of a few days, these materials can reach moisture content levels high enough to prevent you from achieving successful prints. The presence of moisture in filament can cause a number of visible effects such as poor surface finish, stringing, and oozing as well as less visible effects on the mechanical properties of your finished part. As a result, moisture-sensitive materials will need to be dried prior to printing.

  • Telltale signs that you are printing with wet filament include hissing and popping sounds, as well as inconsistent material extrusion and nozzle blockages.
  • Commonly affected material types include PET, PEEK, PEI, PC, and most notably Nylon or PA-based materials.
  • Note: Drywise does not currently support PEEK, PEI, or PC materials.
Dentist Interview

Thermoformed Braces

Experience Active Drying in Real Time

However long your 3D printing process is, Drywise will make sure the material is consistently dry throughout the whole print. It does this by processing the right amount of material at just the right time. This also eliminates material degradation, which usually occurs, due to thermal cycling.

  • With Drywise, long prints have never been more consistent. While oven-dried filament will reabsorb filament quickly from the environment, tests have demonstrated that parts dried will retain performance throughout the duration of long print jobs.
  • Want to learn more? View the White Paper Here.

Markforged Onyx and Thought3D Drywise In-Line Filament Dryer

Optimize Your Onyx Prints with Consistent In-Line Drying for Superior Quality

The Drywise in-line filament dryer ensures optimal printing conditions by consistently drying hygroscopic materials like Onyx, reducing waste and production delays. With a short pre-dry cycle and custom profiles for Onyx materials, Drywise helps eliminate the issues caused by wet Onyx, leading to stronger, high-quality prints.

  • Reduces material waste and enhances print reliability by ensuring fully regenerated Onyx.
  • Compatible with Markforged printers and Onyx material types, including Onyx FR and Onyx ESD.
  • Saves time with in-line drying during 3D printing, streamlining the production process.
  • Prevents moisture absorption from compromising Onyx’s strength, accuracy, and surface finish.
  • Features precise sensor-controlled drying for maximum material performance and durability.
  • Compatible with Markforged X7, X3, Mark Two, Onyx Pro, and Onyx One

Read the entire Pager Here!

Case Studies

Explore Real-World Success Stories Using Drywise Technology

Achieving Zero Material Waste – In partnership with 3D Promakim, this case study highlights how Drywise enabled a fully optimized workflow, eliminating material waste, improving production efficiency, and reducing operational costs by 12,000 EUR yearly.

Drywise Success Story – Collaborating with Printpool, this case showcases how Drywise helped overcome moisture challenges, leading to consistently high-quality prints and reduced downtime.

Material Profiles

Material profiles are constantly being evaluated and added to Drywise's list of compatible materials.

The latest material profile lists (Sept. 2023) can be found here:

1.75mm Compatible materials

2.85mm Compatible Materials 

Markforged Onyx Drywise Profile Report

Drywise Inline Filament Dryer Technical Specifications

What are the Dimensions for the Drywise Inline Filament Dryer?

  • Dimensions: 590x 500 x 145 mm (23 x 20 x 6 inches)
  • Compatible filament diameter: 2.85mm or 1.75mm
  • Weight: 10.5 kg (23 lbs)

What are the Drywise Inline Filament Dryer's properties?

  • Device: Active In-Line Filament Dryer
  • Technology: FFF Filament Pre-Processing
  • Interface: 4.3" Capacitive touch panel. Guiding LED Lights
  • Filament Path: Guided Input and Output
  • Filament Diameter: 2.85mm or 1.75mm
  • Compatible Materials: Drywise.co/materials
  • Quick Start Guide


Back to top