Ultimaker UltiMaker 2+ All-Size Nozzle Pack
The UltiMaker 2+ Variety Pack contains five different nozzle sizes (0.25mm, 0.4mm, 0.6mm, 0.8mm, and 1.0mm) to cover a wide range of print needs. This pack is ideal for makers who need different nozzle sizes for different projects, or for those who want to experiment with different configurations to find what works best for them.
- Comes with five different nozzle sizes
- Ideal for makers who are constantly taking on new and different projects
- Directly compatible with the Olsson Block of the Ultimaker 2+
| List Price: | $93.45 |
|---|---|
| Price: | $89.00 |
| Price: | $... |
| Availability: | In Stock |
| Order Now: | Processed Immediately Free U.S. Shipping |
For the diverse schedule
Can't decide which Ultimaker 2+ nozzle pack is right for you? Neither can we - so here is the variety pack, with two standard 0.4mm nozzles and one each of a 0.25, 0.6, and 0.8 for whatever project comes your way. This pack is ideal for makers who are constantly taking on new and different projects. One day you need the tiny 0.25mm for micro-detail on tiny parts but tomorrow you need large, strong pieces from the 0.6 or 0.8mm. Also a great choice for the new printer owner who wants to experiment with different configurations to find what works best for their needs - these nozzles are directly compatible with the Olsson Block of the Ultimaker 2+ and change out in minutes!
Check out all of the Ultimaker 2+ nozzle packs!
There are five different Ultimaker 2+ Nozzle packs availalbe, take a look at each one right here:
- 0.25mm Five Pack - For high detail prints
- 0.4mm Five Pack - Spare standard size nozzles
- 0.6mm Five Pack - Achieve a higher print speed
- 0.8mm Five Pack - Prototype even faster with these huge nozzles
- Variety Pack with a 0.25mm, 0.6mm, 0.8mm, and two 0.4mm Nozzles - The benefits of every nozzle, in one box
Technical Specifications
- Filament Diameter: 2.85mm
- Machine compatibility: Ultimaker 2+ (Olsson Block)
- Package contents: 5 Nozzles
- 1x 0.25mm
- 2x 0.4mm
- 1x 0.6mm
- 1x 0.8mm
How to change a 3D printer nozzle
- Heat the hotend to the printing temperature of the loaded filement.
- Unload the filament from the hotend.
- Using a wrench, break the nozzle loose from the hotend.
- Carefully unscrew the nozzle from the hotend all the way, it will be hot!
- Thread the new nozzle into the hotend, it will heat up quickly so be careful.
- Using a wrench, tighten the new nozzle into the hotend. Careful not to over tighten as you run the risk of shearing off the nozzle!
- Reload filament and ensure it's flowing freely through your new nozzle.
- Print!
Questions
What is the mechanical properties of this ABS like Elasticity Modulue and poissons ratio and density?
What are dimensions of reel. Will it fit in the Ultimaker material handler?
What would cause layer separation? Print temp 250 C Bed temp 90 C (max of my printer) Speed 60 mms Cooling ON
What are the mixing proportions of the ABS?
All I can add is that I'm testing my luck with a CR6Max. Here's the trick to adhesion... ---- I maxed out the OEM settings at 260/90 and run my 1st layer SLOW. As in 10 slow. ---- Only using glue on a glass bed and after the 1st layer adheres she's running. Benchy came out 9.5/10 first attempt, first ABS print ever.
Is it food, microwave and dishwasher safe?
Why is this filament so difficult to print with? I'm running a heated enclosure @ 45C, printing at 235C, with a heated bed of 110C. Printing small 1-2 inch parts on a level/clean bed with proper first layer leveling and I'm getting absolutely awful warping that ruins the prints. So far I can't see anything PRO about this filament.
Hey! I just wanted to see if you had any pictures comparing this (MH Pro Series Purple) compared to the Build Series Purple. The Pro looks a bit more matte and lighter in hue than the Build--something I've been looking for!
My build recommends esun pla+, or esun abs, I am looking for maximum shock/impact resistance, with maximum layer adhesion, not concerned with cost of filament, in other words not looking for the bargain filament on this build. My question is the pro series better than esun filament?