UltiMaker Clear PRO Series Ryno Filament - 2.85mm (10lb)
UltiMaker PETG filament is suitable for creating durable parts and prototypes for industrial use. It's compatible with UltiMaker 3D printers, offering easy setup with predefined printing profiles. Key specs include extrusion temperatures of 250±10°C, bed temperature of 65±5°C, 2.85mm filament diameter, and recommended PRO Series Breakaway Support Material for support.
- Optimal for end-use parts and prototypes.
- Advanced preconfigured printing profiles.
- Compatible with PRO breakaway support material.
| Price: | $220.00 (with add-ons) |
|---|---|
| Availability: | In Stock |
| Order Now: | Ships Today Free U.S. Shipping |
Excellent Color Selection and Superb Performance with UltiMaker PETG
UltiMaker PETG is an ideal material for creating end-use parts, functional prototypes, or manufacturing aids that establish safety and organization in complex, industrial settings, while holding up to those often-severe environments. And because UltiMaker 3D printers are already equipped with state of the art printing profiles for UltiMaker PETG, you, your school, or your company can be up and printing this phenomenal material as soon as you need it.
Technical Specifications
- Recommended Extrusion Temperatures: 250±10°C
- Recommended Bed Temperature: 65±5°C
- Filament Diameter: 2.85mm ± 0.05mm
- Density: 1.27 g/cm3
- Volume: 0.79 L
- Length: 93m
- Recommended Support Material: PRO Series Breakaway Support Material
- Download the Technical Data Sheet
- Download the Safety Data Sheet
Questions
What are the dimensions of the 5lb spool? When I select the 10lb spool, the dimensions listed under the Technical Specs do not change. I want to make sure the 5lb spool fits in my filament dryer.
This is comment and not a question. I just made a set of 3 parts with RYNO for the first time. After 2 tries at getting the temps and speeds set correctly, I made 99.9% perfect prints of all 3 parts in pretty reasonable times on my AnkerMake M5. I was pretty stunned at the results. Really like the results with Pro Series RYNO. For anyone else that needs reference: Fan 100% with fan disabled for first 3 layers. Bed is standard AnkerMake PEI cleaned with alcohol before start of print. Nozzle temp: 245°C Bed temp: 65°C First layer speed: 50 Outer wall speed: 60 Inner wall speed: 80 Sparse speed: 60 Internal solid infill speed: 60 Top surface: 65 Gap infill: 50 Support: 65 Travel: 500 Filament was in dryer for 3-4 hours to get down to 22%RH and ran from dryer with RH between 18-22% during printing.