Bambu Lab Silver PRO Series PLA Filament - 1.75mm (5lb)
PTFE Tubes for Bambu Lab 3D Printers and AMS reduce filament resistance, are consumable, and should be checked for wear during maintenance. Replace as needed to avoid feeding failures. Available in pre-cut sizes with an inner diameter of 2.5mm and an outer diameter of 4mm.
- Reduces filament resistance
- Wears over time
- Easy to replace
| Price: | $100.00 (with add-ons) |
|---|---|
| Availability: | In Stock |
| Order Now: | Ships Tomorrow Free U.S. Shipping |
PTFE Tube
White PTFE Tubes pre-cut/batched specifically for Bambu Lab 3D Printers and the Bambu Lab AMS.
Key Features of the PTFE Tube for Bambu Lab 3D Printers:
- Reduce resistance and guides filament
- Consumable—risks of wear over time
- Check for wear during maintenance routines
- Replace when needed to avoid potential feeding failures
Installation
Find instructions for replacing the Bambu PTFE Tube here
Product Specifications
| Material | PTFE |
| Color | White |
| Inner Diameter | 2.5mm |
| Outer Diameter | 4mm |
| Product Weight | 20g / 80g |
| Packaging Size | 200×145×5mm |
Questions
This material seems to have terrible warping through our e3d volcano extruder when printing at lowest temperatures and max fan, is this material especially sensitive to chamber temperature and/or humidity? Cheap amazon PLA's don't seem to have any of the same issues...
In addition to my previous question, what is the diameter of the reel?
Whats the print settings of PRO PLA vs normal PLA? 1. I see your suggested settings of 235°C (assuming nozzle, all layers); This seems high over other 'normal PLA', the Prusa PLA i just took off my machine ran good at 205-210. BUT i did notice your BUILD series PLA states [205±15°C]. So pro just needs to run hotter? 2. Suggested setting says "Print speed 15mm/s" - That seems VERY slow in comparison to Prusa generic PLA I was just running. Again, I checked your BUILD series PLA to compare... nothing is listed, can you provide some more finely tuned print settings? Problem; off the batt with a new 5lb spool this stuff is printing pretty accurately from what I can tell but is VERY stringy. I'm about to test some higher temps and will report back.
Am now using my 2# Robo3D Carbon PLA. My carbon fill nylon should be kept dry. How much must I desicate all my PLA filaments? Have lefdt PLA filaments out for some time with no apparent bad effects.
what are the dimensions on M4S8S7TT? Spool diameter, width, true shipping weight?
What is the spool thickness on these 10lb reels? Want to make sure the holder I make can fit these on it. Also, what is the hole diameter in the reel?
Does this shrink less than the standard PLA when cooling? I don't see any mention of this specifically?
What's the tare weight of the spool?