Bambu Lab Bambu Lab PVA Support Filament - 1.75mm (0.5kg)

Bambu Lab PVA Support Filament is a water-soluble support material designed for your most intricate PLA projects. Its smooth interface ensures a strong bond while allowing for easy removal. Speed up post-processing and minimize the risk of damaging your print. To achieve optimal results, it's highly recommended to use a nozzle larger than 0.2 mm. This will ensure you maximize performance and quality in your projects.

  • Easily dissolves in water
  • Features a smooth support interface
  • Compatible with all PLA filaments
  • Compatible with AMS and AMS Lite
List Price: $51.99
Price: $51.99
Price: $...
Order Now: Ships calculating... MatterHackers Shipping Truck Free U.S. Shipping
Qty
loading...
Available Add-ons (4)
$268.00 $259.00 View Addon »
$99.99 $94.99 View Addon »
(Out of stock) $149.99 $144.99 View Addon »
$24.50 View Addon »
Show More Addons
Product No. M-T20-KV5V

Bambu Lab PVA

Soak and Dissolve for Supporting Intricate Details

The smooth support interface of Bambu Lab PVA Support for PLA allows for an easy removal process. Simply submerge your finished print in water and let it dissolve. Its compatibility with all PLA filaments opens up endless possibilities for designing and printing intricate projects. When stored and dried correctly, it is suitable for use with AMS and AMS Lite.

Key Features of the Bambu Lab PVA 3D Printer Filament:

  • Remove in water - no tools needed
  • Smooth support interface
  • Compatible with: PLA, PLA-CF, and PLA-GF
  • Compatible with AMS and AMS Lite
  • For optimal results, dry the filament and use a Hotend with a nozzle of 0.4 mm or larger

Thorough and Clean Dissolution

Bambu Lab PVA Support Filament for PLA is an exceptional water-soluble support material designed to reach deeply into the intricate details of complex prints. This innovative solution ensures that your creations are supported precisely where needed, allowing for flawless finishes and higher-quality results. Elevate your 3D printing experience with the reliability and effectiveness of Bambu Lab’s Support Filament.

  • Accommodates zero top interface spacing
  • Use warm water to speed up dissolution
  • You can manually remove partially dissolved PVA to save time
Thorough and Clean Dissolution

Recommended Printing Settings

Description Value
Nozzle Temperature 220 - 250 °C
Bed Temperature (with Glue) 35 - 45 °C
Drying Settings before Printing 80 °C, 12 h
Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant)
Printing Speed < 200 mm/s

Physical Properties

Property Value
Density 1.27 g/cm³
Vicat Softening Temperature N/A
Heat Deflection Temperature N/A
Melting Temperature 202 °C
Melt Index 7.2 ± 1.1 g/10 min

Mechanical Properties

Property Value
Tensile Strength N/A
Breaking Elongation Rate N/A
Bending Modulus N/A
Bending Strength N/A
Impact Strength N/A

Tips & Tricks

  • Dry the filament at 80°C for 12 hours before use. Find filament dryers here.
  • Please carefully read the PVA Printing Guide before starting the printing process.
  • PVA may develop a deeper color over time or after multiple drying cycles, but this change won't impact its printing performance or support capabilities.
  • It is recommended to use normal supports instead of tree supports.
    • Tree supports are more likely to collapse during the printing process.
  • For best results, use a Hotend with a nozzle of 0.4 mm or higher.
    • Or a Hotend with a Stainless Steel Nozzle 0.4 mm.
  • For enhanced adhesion, apply a glue stick to your print bed.
  • The maximum water soaking temperature should not exceed 50°C to prevent deformation of the main model.
  • Some parts of the main model may leak into the water. To mitigate this risk, please refer to the Reduce the Risk of Print Leakage Guide.

What's in the Box

All Bambu Filaments are shipped in individual packages shown below:

  • Filament with Spool(1)
  • Package(1)

Filament with Spool

Package


Notify me when this item becomes available

Available Financing

Back to top