BondTech Bondtech BMG-M & Mosquito Hotend Bundle (24v)

Two of the greatest 3D printer accessories now in one bundle! The Mosquito Hotend, developed by the geniuses at Slice Engineering, is a radical new take on 3D printer hotend form. Now with the improved keyhole design, the Mosquito Hotend is even hotter (and cooler) than ever because it interfaces perfectly with the BMG-M Extruder from Bondtech.

Bondtech BMG-M Extruders are lightweight, powerful, dual hobb-geared 3D printer extruders specially designed to interface with the Mosquito Hotend from Slice Engineering. They feature a 3:1 gear ratio, which is the perfect combination of speed and precision for both high flow and high resolution applications.

List Price: $224.99
Price: $224.99
Price: $...
Availability: Out of Stock Notify Me
Notify me when this is available
Add to wishlist
Available Add-ons (5)
(Out of stock) Price: $23.99 $15.99 View Addon »
Price: $29.99 $24.99 View Addon »
Price: $9.99 View Addon »
Price: $2.99 View Addon »
Price: $14.99 View Addon »
Show More Add-ons
Product No. M-KEE-F3TK

WHAT'S INCLUDED IN THIS BUNDLE:

SO HAPPY TOGETHER...

Bondtech has created an incredible 3D printer extruder in the BMG Extruder. Thanks to its dual drive gears, it is lightweight, speedy, and precise. Meanwhile, the Mosquito Hotend from Slice Engineering is the best of lightweight, minimalist 3D printer hotends. Now - they live as one! The Mosquito Hotend features mounting holes and locating indents designed to fit the bottom of the BMG-M (M for Mosquito) Extruder for a totally lightweight, dual hobb-geared, direct-drive system for your 3D printer.

YOU'RE HOT THEN YOU'RE COLD

The core to the Mosquito Hotend is in the separated module design. The frame at the cold end, which feeds the filament down, is separated entirely from the heater block by four metal support rods. This creates a spacious air gap between the two modules, where a minimal, copper heatsink guides the filament down into the heater block, and a small, mounted fan keeps the right amount of air flowing through the whole setup.

By combining each of these design elements, the heat creep effect has been effectively eliminated. The heat will stay contained just where it needs to be for clean, efficient printing-- all in an elegant and compact form.

TWO DRIVE WHEELS ARE BETTER THAN ONE 

The Bondtech BMG-M Extruder features two hobbed drive wheels that grip the 3D printing filament from both sides, providing a strong and reliable feed into the hotend. From common materials like PLA and ABS, to flexibles like PRO Series Flex or Ninjaflex, the dual-drive gears of the Bondtech BMG-M Extruder will deliver a consistent flow of filament into your 3D printer's Mosquito Hotend.

FAN FANDOM


The Mosquito Hotend features a small fan that perfectly mounts on the side of the Mosquito Hotend frame, and blows just the right amount of air across the copper heatsink, and away from the print area. This helps ensure the proper temperature required for your 3D printing job is maintained.

EASILY ADJUSTABLE TENSION

The BMG-M is designed with a door on the side, which holds one of the dual-drive gears. This door is held closed with a spring-tensioned thumbscrew. This thumbscrew enables precision tensioning of the hobbed drive gears for the perfect hold on filament, as well as the ability to easily release the tension and easily load or unload 3D printing filament. All you need to do is press away from the extruder, and the spring will compress just enough to release the material, letting you freely feed it directly into the Mosquito Hotend.

EASY COME, EASY GO

An additional, exciting benefit of the four-rod design is that the heater block is completely stationary, so inserting and removing your nozzle doesn't move the heater block! With no need to hold the heater block in place, removing and installing your nozzle just became much faster and easier!

Questions View All Responses

Will this work on an Ender 3 Max?

Add Response

would this be good for the sidewinder x1 with stock board?

Add Response

What is total weight of it in grams?

Add Response

Does this come with the thermal paste?

Add Response

What is needed to make this work with the CR-10 Max? I have a backorder in for the Hemera but I'd prefer this option if you can support it.

Add Response

Looking for a mounting plate file or perhaps an aluminum or ABS Mount, plus applicable conversion hardware for a (Evnovo) Artillery Sidewinder X1. Seems there are copious upgrade possibilities for this unit but most lack hardware packages for installation requiring a wild goose chase for mounting plates and screws or fan shrouds etc... All Input Appreciated.

Add Response

What is the maximum extrusion speed using a 0.8mm nozzle with this setup?

Add Response

Do you have this bundle for the Mosquito Magnum or do I need to buy the extruder and hotend separately?

Add Response

will this product mount to my CR10S Pro V2? Bondtech BMG-M & Mosquito Hotend Bundle (24v)

Add Response

Does this kit come with everything you need? Thermistors, heater cartridge, nozzle etc???

View 1 Response

Will this work for a Raise3D N2 Plus?

Add Response

Can I use my current heat, and thermistor?

View 1 Response

Where do I find the mount for Prusa I3 MK3s I've looked almost everywhere.

View 1 Response

Will this work with the Creality CR-10 Max? - - if so - - Is there a conversion kit?

View 1 Response

Will this work on an Ender 5 PLus? Also, will I need a custom mount and make firmware changes for this to work with my printer?

View 1 Response

Which version of the Mosquito comes with this kit? The retired one or the current one?

View 1 Response

will this Bondtech BMG-M & Mosquito Hotend Bundle (24v) work on My Taz4 that's upgraded to a Taz5.?

View 1 Response

so this does NOT come with the thermistor, heater and stepper? what about nozzle?

View 1 Response

What does this fit on it seems all the most popular printers out there need a lot of work to make this work.Its great to see a good quality setup but it does need to work with a printer

View 1 Response

Will this work on my ender3 and what size is the extruder? I'm trying to print with 1.75mm.

View 3 Responses

What is included with this bundle? Obviously the BMG-M extruder and the hot end, but what about the nozzle, heater, and temperature sensor?

View 1 Response

I'm OK designing a mount for this, but are there specs for how it mounts? It's unclear where/what attachment is available.

View 1 Response

What is the overall weight of this combo?

View 3 Responses

Will this work on my CR-10S Pro?

View 1 Response

Will this work on a enclosed area with high temp printing? 420 degrees?

View 1 Response

How would this work with the Prusa i3 MK3s as far as installation and Firmware updates and configuration.

View 4 Responses

On this mosquito mag. Hot end with Bondtech & Steppet set up as a direct drive for CR-10s Pro. Is there a mount out there for this setup ... or do I need to design my own. Thanks.

View 1 Response

Would this fit the vivedino Raptor 2

View 1 Response

Ask a question about this product

Notify me when this item becomes available

Available Financing

Back to top