E3D Black PRO Series ABS Filament - 2.85mm (1kg)
The E3D Revo V6 is an updated version of the E3D V6 with enhanced performance. It is compatible with Revo Nozzles and uses a Revo HeaterCore, which reaches temperature much faster than a traditional aluminium heaterblock. It is also safer, with a positive temperature coefficient (PTC) that prevents melting at extreme temperatures. The anodised black heat sink and included crystal-clear fan duct give the Revo V6 a distinctive look.
- HeaterCore reaches temperature much faster than a traditional aluminium heaterblock
- PTC means the HeaterCore can't melt at extreme temperatures
- Ships with a premium crystal-clear fan duct
| Price: | $52.00 (with add-ons) |
|---|---|
| Availability: | In Stock |
| Order Now: | Ships Tomorrow Free U.S. Shipping |
Key features of the E3D Revo V6
- Max temp: 300C
- Works with Revo HeaterCore and Revo Nozzles
- Mounting system: Groove mount
- Dimensions:
- Diameter: 16.2mm
- Length 62.4mm
- Voltage: 12V or 24V
- Material compatibility: 1.75mm
No machine redesign. Revo Six is a top choice if you want to update your old E3D V6 setup to the latest generation of E3D HotEnd technology. It has the same height, the same diameter, and the same groove mount as the E3D V6, so it drops straight into V6-fitted machines without the hassle of redesigning print head mounts and accessories. Just fit it, connect the Revo HeaterCore, and you’re ready to 3D print.
Ready for Revo. Revo Six is designed to work with Revo Nozzles, so you can perform nozzle swaps with your fingers at room temperature without complex tools or hot tightening. Each Revo Nozzle is factory sealed, making it much simpler to use and more reliable than most HotEnd technology available today.
Enhanced performance. Revo Six uses a Revo HeaterCore, the latest HotEnd heating and sensing architecture. It reaches temperature much faster than a traditional aluminium heaterblock, and it’s much safer: a positive temperature coefficient (PTC) means the HeaterCore can’t melt at extreme temperatures, reducing hazards in the event of a thermal runaway.
A new look. An anodised black heat sink distinguishes Revo Six from its predecessor, and every unit ships with a premium crystal-clear fan duct so your machine will stand out from the crowd.
At MatterHackers, to bring you new and exciting products, we occasionally shift some of our quality stock to the Clearance section.
Reasons for Clearance Items:- New Product Versions: When manufacturers release updated versions of printers, CNC machines, filament, etc., the older versions typically go to Clearance.
- Overstock: Items we have in excess are moved to Clearance to free up warehouse space.
- Discontinuation: Discontinued product lines often end up in Clearance to expedite the sale of remaining stock.
- Packaging Changes: When packaging updates occur, we shift the older packaged items to Clearance.
- Poor Quality: Clearance items meet our rigorous quality standards and often brand new, unopened products.
- Limited Support: You'll receive our excellent customer service for Clearance items. Note, all Clearance purchases are Final Sale and not covered by the MatterHackers Return Policy.
Note, all Clearance purchases are Final Sale and not covered by the MatterHackers Return Policy.
Questions
What is the mechanical properties of this ABS like Elasticity Modulue and poissons ratio and density?
What are dimensions of reel. Will it fit in the Ultimaker material handler?
What would cause layer separation? Print temp 250 C Bed temp 90 C (max of my printer) Speed 60 mms Cooling ON
What are the mixing proportions of the ABS?
All I can add is that I'm testing my luck with a CR6Max. Here's the trick to adhesion... ---- I maxed out the OEM settings at 260/90 and run my 1st layer SLOW. As in 10 slow. ---- Only using glue on a glass bed and after the 1st layer adheres she's running. Benchy came out 9.5/10 first attempt, first ABS print ever.
Is it food, microwave and dishwasher safe?
Why is this filament so difficult to print with? I'm running a heated enclosure @ 45C, printing at 235C, with a heated bed of 110C. Printing small 1-2 inch parts on a level/clean bed with proper first layer leveling and I'm getting absolutely awful warping that ruins the prints. So far I can't see anything PRO about this filament.
Hey! I just wanted to see if you had any pictures comparing this (MH Pro Series Purple) compared to the Build Series Purple. The Pro looks a bit more matte and lighter in hue than the Build--something I've been looking for!
My build recommends esun pla+, or esun abs, I am looking for maximum shock/impact resistance, with maximum layer adhesion, not concerned with cost of filament, in other words not looking for the bargain filament on this build. My question is the pro series better than esun filament?