Formlabs Formlabs Elastic 50A Resin V2 (1L) for Form 4
Elastic 50A V2 Resin is a soft, translucent elastomer ideal for creating flexible, durable prototypes and parts. With a 50A Shore durometer, it mimics softer rubbers and silicones, featuring high elongation, durability, and quick springback. Produce suitable wearables, medical models, special props, and more with this pliable material.
- Mimics softer rubbers with 50A Shore hardness
- High durability; withstands repeated bending and stretching
- Translucent for visibility inside model
- Cartidge compatible with Formlabs 4 series 3D printers
List Price: | $199.00 |
---|---|
Price: | $199.00 |
Price: | $... |
Elastic 50A V2 Resin
SOFT ELASTICITY
Discover the versatility of Elastic 50A Resin V2, a soft, translucent elastomer perfect for flexible prototypes and parts. With a 50A Shore durometer, it mimics softer rubbers and silicones, offering high elongation, durability, and a fast springback without tearing. Ideal for wearables, medical models, and special effects, it's the ultimate choice for creating durable, pliable parts with a clear view into your models.
Key Features of the Formlabs Elastic 50A V2 Resin:
- Enables prototyping of flexible, pliable parts
- Soft, translucent elastomer mimics rubber and silicone
- Withstands repeated bending and stretching w/o tearing
- Bendable parts spring back quickly
- Ideal for straps, compressible buttons, casings, medical models, and more
Engineering Application |
SLA Technology |
Translucent |
3.4 MPa Ultimate Tensile Strength |
160% Elongation at Break |
55 A Shore Hardness |
COMPATIBILITY | ||
Printer(s)* Form 4 / 4B Form 3L / 3BL Form 3+ / 3B+ Form 3 / 3B Form 2 |
Resin Tank(s) [RT] Form 4 / 4B RT Form 3L / 3BL RT V2 Form 3L / 3BL RT V1 Form 3 / 3B RT V2.1 Form 2 LT Tank Form 2 RT (PDMS) |
Build Platform(s) [BP] Form 4 BP Flex Form 4 BP Form 3L BP Form 3 Stainless Steel BP Form 3 BP 2 Form 3 BP |
*The resin is compatible with these 3D printers. Please ensure you're selecting the correct cartridge compatibility at purchase as the Form 4 uses a different cartridge system from previous models. The listing you are currently on is for the Form 4.
For the Form 3 series / 2 compatible cartridges, click here.
What are the Material Properties* of the Formlabs Elastic 50A V2 Resin?
Shore Hardness | 55A |
Ultimate Tensile Strength | 3.4 MPa |
Stress at 50% Elongation | 0.9 MPa |
Stress at 100% Elongation | 1.7 MPa |
Elongation | 1.6 |
Tear Strength | 12.3 kN/m |
* Material properties may vary based on part geometry, print orientation, print settings, and temperature. Data was obtained from parts printed on a Form 2 printer with 100 µm Elastic settings, washed in a Form Wash for 20 minutes, and post-cured at 60°C for 20 minutes in a Form Cure.
Download the Formlabs Elastic 50A V2 Resin Technical Data Sheet
Download the Formlabs Elastic 50A V2 Resin Safety Data Sheet
FORM WASH SETTINGS | FORM CURE SETTINGS |
Duration | Duration |
10 min | 30 min |
Temperature | |
70°C | |
Notes | Notes |
Wash Elastic 50A Resin V2 for 10 minutes on the build platform. Remove parts from the build platform, then wash for 10 more minutes using fresh solvent. Avoid washing Elastic 50A Resin V2 for longer than 20 minutes, as this may degrade parts. |
There is only one recommended post-curing time for Elastic 50A Resin V2. Fully submerge the dry parts in water in a glass beaker placed inside Form Cure. |