MakerBot MakerBot ABS Precision Mixed Pack

PRINT MANUFACTURING ABS WITH METHOD X

Designed to challenge traditional manufacturing, Method X is capable of printing real, production-grade ABS (acrylonitrile butadiene styrene) in its 100°C heated chamber. Utilizing Stratasys SR-30 soluble supports, Method X delivers exceptional dimensional accuracy and precision when printing complex, durable parts. The real ABS used in MakerBot filament can withstand up to 15°C higher temperatures, is up 26% more rigid, and up to 12% stronger than modified ABS formulations used in traditional ABS filaments.

MakerBot ABS Precision Filament is available in a wide range of colors - allowing users to select the right color for any job.

MATERIAL DATA

• Heat Deflection @ 66 psi - ASTM 648: 84°C (183°F)
  
• Flexural Strength (Method 1, 0.05”/min): 65 MPa (9,427 psi)
  
• Flexural Modulus (Method 1, 0.05”/min): 77 Mpa (11,200 psi)
  
• Tensile Strength at yield ((Type 1, 0.125”, 0.2”/min): 43 Mpa (6,236 psi)
  
• Tensile Modulus (ISO 527): 2,400 MPa (348,090 psi)
  
• Strain at Yield - Elongation (%): 2.6%
  
• Notched Impact Strength (ASTM D256): 26 J/m (0.48 ft-lb/in)

MakerBot SR-30 Precision Support Material is engineered to work seamlessly with ABS and other high-temperature materials.

ABS PRECISION TECH SPECS

PRINTER COMPATIBILITY

• MakerBot Method X

SPOOL TYPE

Smart Spool - provides valuable information including material type, color, and amount remaining via an RFID chip directly to MakerBot Print. A desiccant included in the spool maintains a low moisture level when spools are stored inside the material drawer bay.

SOFTWARE COMPATIBILITY

• MakerBot Print

DIMENSIONS AND WEIGHT

• Spool Diameter: 21.8 cm (8.6 in)
• Spool Width: 4.2 cm (1.65 in)
  
• Material Diameter: 1.75 mm
  
• Shipping Weight: 1.1 kg (2.4 lb)
  
• Net Weight: 0.75 kg (1.65 lb)

SR-30 PRECISION SUPPORT TECH SPECS

PRINTER COMPATIBILITY

• MakerBot Method X

SPOOL TYPE

Smart Spool - provides valuable information including material type, color, and amount remaining via an RFID chip directly to MakerBot Print. A desiccant included in the spool maintains a low moisture level when spools are stored inside the material drawer bay.

SOFTWARE COMPATIBILITY

• MakerBot Print

DIMENSIONS AND WEIGHT

• Spool Diameter: 21.8 cm (8.6 in)
• Spool Width: 4.2 cm (1.65 in)
  
• Material Diameter: 1.75 mm
  
• Shipping Weight: 1.0 kg (2.2 lb)
  
• Net Weight: 0.65 kg (1 lb)

KIT CONTENTS:

• (2) Black
• (2) White
• (2) Orange
• (3) SR-30 Precision