Slice Engineering Slice Engineering Mosquito Magnum+ Hotend - Configurable Kit
The Slice Engineering Mosquito Magnum+ Hotend includes all of the industry-leading benefits of the Mosquito Product line such as bimetallic heat break technology, a 500°C temperature rating, the ability to print all filament from basic PLA to medical-grade PAEK, and the rigid roll cage structure that enables quick one-handed nozzle changes.
Top Slice Engineering Mosquito Magnum+ Hotend Features:
• Filament contacts hot block directly for maximum heat transfer efficiency
• Enhanced structural strength, ideal for large format printers and non-planar printing
• Print PLA up to 88mm 3/s and ABS up to 91 mm3/s
• Boost speed without losing resolution
• Only 30% heavier than a standard Mosquito Hotend, but with 3.5x the output
| List Price: | $289.99 |
|---|---|
| Price: | $289.99 |
| Price: | $... |
| Availability: | In Stock |
| Order Now: | Ships Tomorrow Free U.S. Shipping |
Note: This hotend kit does not come assembled. Assembly instructions can be found here
The Slice Engineering Mosquito Magnum+ Hotend Kit
Achieve breathtaking velocity, with Mosquito Magnum+
This Mosquito Magnum+ Hotend kit includes:
- (1) Mosquito® Heat Sink - Magnum+
- (1) Hot Block Magnum+ - 1.75
- (1) Mosquito® Heat Break - Standard - current
- (1) Hot Block Hardware - Magnum+
- (1) Hotend Wrench Set
- (1) Hotend Mounting Hardware
- (1) Boron Nitride Paste
Note: This hotend kit does not come assembled. Assembly instructions can be found here
Say goodbye to lengthy print times
The Slice Engineering Mosquito Magnum+ hotend has successfully overcome the limitations related to flow rate capacity and kinematics that plagued printing processes of the past. Through design by thermal optimization, the Mosquito Magnum+ has addressed the issues of flow rate, resolution, and mass without the need to trade quality and resolution in exchange for speed.
- Only 30% heavier than a standard Mosquito Hotend, but with 3.5x the output
- Print PLA Up to 88mm3/s and ABS 91mm3/s
- Boost speed without losing resolution
Bridge the gap between traditional manufacturing and FFF additive manufacturing with Magnum+
The Slice Engineering Mosquito Magnum+ addresses one of the primary concerns with material extrusion-based 3D Printing — print speed. Equipped with (2) 50W, 24V Industrial heaters, and a temperature rating of 500C this configuration of the Magnum+ is able to achieve higher volumetric flow rates than traditional hotends further mitigating the gap between traditional manufacturing methods and those of small and large-scale FFF production.
- Print all filament from basic PLA to medical-grade PAEK
- Filament contacts hot block directly for maximum heat transfer efficiency
- Enhanced structural strength, makes Magnum+ ideal for large format printers and non-planar printing.
Questions
Does This work for most printers as i was going to use this for my rebranded Wanahao Duplicator i3 plus. Thank you, Alexander. Ps Are you a robot?
Is it possible to build a sample pack of various colors?
I bought this filament and my prints fall apart after and/or during printing. The layers are not sticking together to form a solid bond. I have tried using different tempts and speed with no success. The bottom layers are firmly attached to bed and they are more stable than the side walls (vase). Any suggestions?
Try increasing the perimeters and bumping up the temp 5-10C
If that does not work, send us an email to Support@MatterHackers.com and we would be happy to assist!